[Schneider Electric] AllProducts
Lab Instruments & Supplies
- Electronic/Electrical Parts and Controll Equipments
- by Product group
- by Product
Sort by:
-
Schneider Electric Harmony XB5 Connector XB5PUSB3
XB5 Panel Mount USB Connector. Schneider Electric XB5 panel mount USB 3.0 type A interface. These interfaces provide a USB 3.0 port in a familiar package that matches the Harmony XB5 range. 22 mm panel cut-out
1 products found
JPY: 5,270
USD: 36.00
-
3 Pole Panel Mount Non Fused Isolator Switch, 50 A, 22 kW, IP65 VCF3GE
Expandable by attachment of auxiliary contact or main/neutral pole (except 10,16 20, 25 ; 32A Typically: ; 257-3752 257-3752 ). VCF Enclosed Switch Disconnector. IP65 Rated
1 products found
JPY: 15,670
USD: 107.05
-
Schneider Electric VZ7, NO/NC (2), Auxiliary Contact VZ7
Suitable for the 'Vario' range of switch disconnectors. Accessories for the Open and Enclosed Switch Disconnectors
1 products found
JPY: 2,530
USD: 17.28
-
Schneider Electric 3 Pole Contactor, 6 A, 24 V dc Coil, TeSys K, 3NO, 2.2 kW LP1K0610BD
Schneider Electric LP1K TeSys K Miniature Contactors. TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP1K range are DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Coil with rectifier incorporated Easily installed accessories Instantaneous auxiliary contact Flexible control circuit to suit a wide range of applications High-fault short circuit current ratings provide the flexibility to select any component. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. Are the TeSys K contactors suitable for applications in AC4 usage?. The LP1K series is suitable up to a maximum of 440 V ac in category AC4. Is the TeSys K range a double break pole type contactor?. Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 4,640
USD: 31.70
-
3 Pole Panel Mount Non Fused Isolator Switch, 12 A, 7.5 kW, IP20, IP65 VCF02
UL, CSA, GL. The figures quoted for rated operational power within the price table are with respect to a voltage of 230/240V, with figures within brackets ( ) being those with respect to a voltage of 690V. The higher current rating refers to use in free air, the lower current rating represents use in an enclosure.. Front/Door Mounting Switch Disconnectors. Adaptable with simple attachment of auxiliary contact, neutral pole, or up to 3 main poles to basic 3-pole switch Suitable for main/emergency switching 690V nominal voltage Ingress protection IP55 Full compliance with BS/EN 60947-3 Supplied as complete kit in one pack
1 products found
JPY: 5,620
USD: 38.39
-
Harmony Harmony XVB Buzzer unit, , 24 V ac/dc XVBC9B
Conforms to: IEC/EN 60947-5-1 (beacons, base and cover). CE, UL, CCC, CSA, Ghost. Schneider XVBC Modular Signal Tower. The Schneider Harmony XVBC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling. These signal towers offer a high degree of protection, extra brightness and excellent reliability enable them to adapt to any type of environment. Industry applications include machine manufacturers (assembly line, etc.), mobile loads (travelling cranes, trolleys, etc.). Para-industrial and service sector include motorway tolls, cash registers, distribution switchboards, etc. Features and Benefits. Available as incandescent (bulbs must be ordered separately) or LED modules May be assembled with up to 5 light modules or 4 light modules and 1 sound module Buzzers are available with intermittent or continuous tones Base ; cover need to be ordered separately for mounting Tubes and tube cover available for raising the beacons height Sound unit operates from a 12-48 Vac or 120-230 V supply providing a sound level of 90 dB at a frequency of 0-12 kHz All units have an operating termperature range of -25 to +50 °C (apart from the static lens units without lamps -25 to +70 °C) Made from Glass Reinforced Polyamide and Polycarbonate IP65 rated Long distance signalling: 35 to 50 m Units are 70 mm in diameter and 63 mm in height Cable access from side or beneath
1 products found
JPY: 56,840
USD: 388.30
-
Schneider Electric 3 Pole Contactor, 6 A, 24 V dc Coil, TeSys K, 3NO, 3 kW LP4K0610BW3
Schneider Electric LP4K TeSys K Miniature Contactors. TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP4K range are low consumption DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience. Features and Benefits. Built-in auxiliary contacts for added switching capability. Screw connections: IP20 finger-safe terminals with both North American and International terminal markings. Can be panel mounted with screws or DIN Rail mounted. Coil with rectifier incorporated. Easily installed accessories. Instantaneous auxiliary contact. Flexible control circuit to suit a wide range of applications. High-fault short circuit current ratings provide the flexibility to select any component. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. Are the TeSys K contactors suitable for applications in AC4 usage?. The LP4K series is suitable up to a maximum of 440 V ac in category AC4. Is the TeSys K range a double break pole type contactor?. Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 6,670
USD: 45.57
-
Schneider Electric 3 Pole Contactor, 12 A, 24 V dc Coil, TeSys K, 3NO, 5.5 kW LP4K1210BW3
Schneider Electric LP4K TeSys K Miniature Contactors. TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP4K range are low consumption DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience. Features and Benefits. Built-in auxiliary contacts for added switching capability. Screw connections: IP20 finger-safe terminals with both North American and International terminal markings. Can be panel mounted with screws or DIN Rail mounted. Coil with rectifier incorporated. Easily installed accessories. Instantaneous auxiliary contact. Flexible control circuit to suit a wide range of applications. High-fault short circuit current ratings provide the flexibility to select any component. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. Are the TeSys K contactors suitable for applications in AC4 usage?. The LP4K series is suitable up to a maximum of 440 V ac in category AC4. Is the TeSys K range a double break pole type contactor?. Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 6,360
USD: 43.45
-
Schneider Electric Harmony XALD Push Button Enclosure, 4 Hole Grey, 22mm Diameter None Plastic XALD04
CE Marked, EN/IEC 60947-1, EN/IEC 60947-5-1, EN/IEC 60947-5-4, JIS C 4520. UL, CSA. XAL Pushbutton Enclosures for Harmony® 5, 22mm Switches. The Harmony XAL series from Schneider are an empty enclosure designed for use with XB5 plastic push buttons, pilot lights, selector switches, mushroom head operators, legend plates and accessories. For normal environments, CSA approved and UL Listed Polycarbonate housing Light grey base with either a dark grey or yellow lid Stainless steel lid mounting screws
1 products found
JPY: 5,070
USD: 34.64
-
Schneider Electric Harmony, Red/Yellow/Grey, Twist to Reset 40mm Mushroom Head Emergency Button XALK178F
Schneider Electric / Harmony XALK Series / Emergency Stop Push Button Switch. The Harmony XALK range of emergency push buttons by Schneider offer you easier, flexible installation. Strong polycarbonate material, means greater reliability in harsh environments. High-grade e-stop function, the mushroom head emergency button trigger action offers an instantaneous cutoff once the alarm is raised to ensure total safety in your working environment. Harmony XALK from Schneider is compliant with EN/IEC 60204-1 and EN/ISO ; Machinery Directive 2006/42/EC. Features and benefits. Bright Yellow RAL 7035 ; Light Grey RAL 7035 panel base unit for greater visibility and awareness in your working environment. Mushroom head push button, red unmarked for clear visibility. Easily resettable with turn-to-release. IP65, IP69K, IP67, IP66, NEMA 4 dust and damp proofing as standard - ensuring reliability in harsh environments. Greater resistance to chemicals and/or double electrical insulation. Low-load electrical contacts (1 NO + 1 NC contact) unmarked for instant cutoff where needed. Plug ; Play surface mountable. Turn to release easily resettable control where the unit has been alerted and activated for easier Start-Stop operations. Screw clamp connection, with pins for printed circuits Reliable short-circuit protection, featuring a 10 A fuse cartridge within the Emergency Push Button. Schneider Green Premium product as standard across the XALK Emergency Stop Button range. 18-month manufacturer warranty with Schneider Compact in nature perfect for confined spaces where E-stops are critical for dangerous machinery. Applications. Energy infrastructure industries Food and Beverage industries Water and Waste Water management systems Metal, Mining and Minerals industries Oil and Gas industries Marine ; Oil Car Washes
1 products found
JPY: 25,850
USD: 176.60
-
Schneider Electric Harmony XB4 Head for use with XB4 Series ZB4BC2
Contact blocks must be ordered seperately (see stock no. ; 331-0158 331-0158 ). Stock nos. ; 330-9013 330-9013 , ; 330-9029 330-9029 , ; 330-9035 330-9035 and ; 342-2627 342-2627 also require a fixing collar (see stock no. ; 331-0142 331-0142 ). For contact blocks that include a collar, please see stock no. ; 331-0192 331-0192 and range. Mushroom Heads for Spring Return Pushbuttons, ZB4-B. ZB4-B series mushroom heads.
1 products found
JPY: 4,120
USD: 28.15
-
Schneider Electric Harmony XB4 2 Position Selector Switch Head Standard Handle Black Latching ZB4BD2
Heads for Selector Switches, ZB4-B. Heads with standard black handle All heads require a body/ fixing collar, see stock no.< 331-0142') 331-0142/ and contact bodies, see stock no. < 331-0158') 331-0158/ etc
1 products found
JPY: 3,200
USD: 21.86
-
Schneider Electric Harmony XB4 3 Position Key Switch Head Latching ZB4BG0
Heads for Key Switches, ZB4-B. ZB4-B series key switches heads. Key releases in stay put position 32mm in height All heads require a body/ fixing collar, see stock no. ; 331-0142 331-0142 and contact bodies, see stock no. ; 331-0158 331-0158 etc Black/chrome in colour
1 products found
JPY: 12,520
USD: 85.53
-
Schneider Electric Harmony, Red, Twist to Reset 40mm Mushroom Head Emergency Button ZB4BS844
All heads require a body/ fixing collar and contact bodies. Schneider Electric / Harmony ZB4-B Series / Emergency Stop Push Button Switch. Introducing the Harmony ZB4-B series of push button switch from Schneider Electric. This particular e-stop button has a snap-fit assembly which is tightened with a single screw, providing you with easy to secure mounting. Harmony ZB4-B series from Schneider meets the most demanding international standards and approvals, such as EN/IEC 60204-1 and EN/ISO ; Machinery Directive 2006/42/EC. Note: All heads require a body/fixing collar and contact bodies. Features and benefits. Easy mountable, using a single installer (Self-maintaining of the head in its cut-out). Clip-together component system (head, body, contact blocks). Chromium plated metal, durable and easy to recycle The switch has great resistance to electric shock, conforming to the machine safety standards of the IEC (Class 1) Single locking screw, making the button easy to mount, reliable and secure. Mushroom head push button switch, red unmarked for clear visibility. Easily resettable with turn-to-release. IP65, IP69K, IP67, IP66, NEMA 4, NEMA 4X, NEMA 12 ; NEMA 13 dust and damp proofing as standard - ensuring reliability in harsh environments. Greater resistance to chemicals and/or double electrical insulation. Compact in nature perfect for confined spaces where E-stops are critical for dangerous machinery. Turn to release easily resettable control where the unit has been alerted and activated for easier Start-Stop operations. Schneider Green Premium product as standard across the XALK Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Energy infrastructure industries (control panels, machinery operation, packaging) Food and Beverage industries (restaurants, kitchens - IP66 waterproofing is perfect for wash-down procedures) Water and Waste Water management systems (control panels, machinery operation, packaging) Metal, Mining and Minerals industries (material handling, pumping/working) Oil and Gas industries (pumping control panels, dangerous machinery)
1 products found
JPY: 12,960
USD: 88.54
-
Schneider Electric Harmony XB4 Series, White Pilot Light Head, 22mm Cutout ZB4BV01
Pilot Light Heads, ZB4-B. Pilot light heads for use with body consisting of either integral LED, neon, or LED The colour of the head should be matched with the same colour of the chosen LED block All heads require a body/ fixing collar, see stock no. ; 331-0142 331-0142 and contact bodies, see stock no. ; 331-0158 331-0158 etc
1 products found
JPY: 1,000
USD: 6.83
-
Schneider Electric Harmony XB4 Series, Green Push Button Head, Spring Return, 22mm Cutout ZB4BW333
Illuminated Pushbutton Heads, Spring Return, ZB4-B. All heads require a fixing collar/ integral LED/ contact assembly, typical stock no. 330-9805 If using LED blocks, the colour of the head should be matched with the LED
1 products found
JPY: 2,480
USD: 16.94
-
Schneider Electric Harmony XB4 Collar for use with XB4 Series ZB4BZ009
Body/Fixing Collar, ZB4-B. The fixing collar is designed to be used with the Harmony XB4 series of push button switches.
1 products found
JPY: 750
USD: 5.12
-
Schneider Electric Harmony XB4 Light Block 1NO 600 V Screw terminal ZB4BZ101
Fixing collar. Schneider Electric / Harmony XB4 Series (ZB4-B) / Light Block. The Harmony XB4 series of Light Blocks by Schneider Electric, specifically the ZB4 range of products offer you the reliability and certainty when you need it the most. The range is typically used as a body for a pilot light and can be used with pilot light heads. Features and benefits. Lightweight, easy to fit and configure screw clamp terminal connectors. Easily removable and adjustable. Mechanical durability of 5,000,000 cycles of use. Rigorously tested by Schneider to ensure the highest quality product reaches you. Schneider Green Premium product as standard across the XB4 Contact block range. Environmentally friendlier than alternatives, easy to dispose of safely. 18 month warranty period with Schneider Electric. Protection ratings ; Safety features - IP 20 conforming to IEC 60529 (protection against certain sized tools, moisture etc.) EN/IEC 60947-1, 60947-5-1 ; 60947-5-4. UL 508 ; CSA C22.2 No 14. Vibration resistance 5 gn (f = 2..500 Hz) conforming to IEC 60068-2-6 Shock resistance to 30/50gn dependant on the duration (see datasheet for spec). Short circuit protection via 10 A cartridge fuse which conforms to EN/IEC 60947-5-1. Applications -. Pilot lights, LED inditactor for push buttons
1 products found
JPY: 3,890
USD: 26.58
-
Schneider Electric Harmony XB4 Light Block 1NO 1NC Screw terminal ZB4BZ105
Fixing collar. Schneider Electric / Harmony XB4 Series (ZB4-B) / Light Block. The Harmony XB4 series of Light Blocks by Schneider Electric, specifically the ZB4 range of products offer you the reliability and certainty when you need it the most. The range is typically used as a body for a pilot light and can be used with pilot light heads. Features and benefits. Lightweight, easy to fit and configure screw clamp terminal connectors. Easily removable and adjustable. Mechanical durability of 5,000,000 cycles of use. Rigorously tested by Schneider to ensure the highest quality product reaches you. Schneider Green Premium product as standard across the XB4 Contact block range. Environmentally friendlier than alternatives, easy to dispose of safely. 18 month warranty period with Schneider Electric. Protection ratings ; Safety features - IP 20 conforming to IEC 60529 (protection against certain sized tools, moisture etc.) EN/IEC 60947-1, 60947-5-1 ; 60947-5-4. UL 508 ; CSA C22.2 No 14. Vibration resistance 5 gn (f = 2..500 Hz) conforming to IEC 60068-2-6 Shock resistance to 30/50gn dependant on the duration (see datasheet for spec). Short circuit protection via 10 A cartridge fuse which conforms to EN/IEC 60947-5-1. Applications -. Pilot lights, LED inditactor for push buttons
1 products found
JPY: 4,840
USD: 33.07
-
Schneider Electric Harmony XB5 2 Position Selector Switch Head Standard Handle Black Latching ZB5AD2
IEC, JIS. UL, CSA. Selector Switch Head - Standard and Long Handle. Standard and Long Black Handle selector switch lever head for Harmony 5 XB5 series selector switches. Standard or Long Black Handle
1 products found
JPY: 2,980
USD: 20.36
-
Schneider Electric Harmony XB5 3 Position Selector Switch Head Standard Handle Black Latching ZB5AD3
IEC, JIS. UL, CSA. Selector Switch Head - Standard and Long Handle. Standard and Long Black Handle selector switch lever head for Harmony 5 XB5 series selector switches. Standard or Long Black Handle
1 products found
JPY: 3,020
USD: 20.63
-
Schneider Electric Harmony XB5 Series, White Pilot Light Head, 22mm Cutout ZB5AV013
IEC, JIS. UL, CSA. Illuminated Head for Pilot Light. Pilot light heads for use with body consisting of either integral LED only or BA9s incandescent bulb, neon, or LED. The colour of the head should be matched with the same colour of the chosen LED block.
1 products found
JPY: 930
USD: 6.35
-
Schneider Electric Harmony XB Contact Block 1NO Screw terminal ZBE101
IEC, JIS. UL, CSA. Schneider Electric / Harmony XB4/5 Series (ZB5AZ) / Contact Blocks. Introducing the Harmony XB4/5 series of ZBE Contact blocks from Schneider Electric. High quality, high performing contact blocks are a necessary part of your day to day operations, providing consistency to your machinery, operations and overall performance. Features and benefits. Short-circuit protection via a 10 A cartridge fuse, providing excellent circuit protection. Lightweight, easy to fit and configure. Easily removable and adjustable. Front mounting. Operating temperature of between -40 to 70 °C. 1,000,000 mechanical cycles of durability. Schneider Green Premium product as standard across the XB4 Contact block range. 18-month manufacturer warranty with Schneider Protection ratings - IP 20 conforming to IEC 60529 (protection from smaller objects, such as fingers) EN/IEC 60947-1, 60947-5-1 ; 60947-5-4. UL 508 ; CSA C22.2 No 14. Vibration resistance to 5 gn 2, suitable for a wide variety of areas that may require devices to be moved. Shock resistance to 30 gn (18 ms duration) conforming to IEC 60068-2-27. Applications -. Used in conjunction with push buttons, signal controllers and more. Applicable uses within machine, chemical or marine applications Perfect for service sectors, energy distribution panels and more.
1 products found
JPY: 2,160
USD: 14.76
-
Schneider Electric Harmony XB Contact Block 1NC 600 V ac Screw terminal ZBE102
IEC, JIS. UL, CSA. Schneider Electric / Harmony XB4/5 Series (ZB5AZ) / Contact Blocks. Introducing the Harmony XB4/5 series of ZBE Contact blocks from Schneider Electric. High quality, high performing contact blocks are a necessary part of your day to day operations, providing consistency to your machinery, operations and overall performance. Features and benefits. Short-circuit protection via a 10 A cartridge fuse, providing excellent circuit protection. Lightweight, easy to fit and configure. Easily removable and adjustable. Front mounting. Operating temperature of between -40 to 70 °C. 1,000,000 mechanical cycles of durability. Schneider Green Premium product as standard across the XB4 Contact block range. 18-month manufacturer warranty with Schneider Protection ratings - IP 20 conforming to IEC 60529 (protection from smaller objects, such as fingers) EN/IEC 60947-1, 60947-5-1 ; 60947-5-4. UL 508 ; CSA C22.2 No 14. Vibration resistance to 5 gn 2, suitable for a wide variety of areas that may require devices to be moved. Shock resistance to 30 gn (18 ms duration) conforming to IEC 60068-2-27. Applications -. Used in conjunction with push buttons, signal controllers and more. Applicable uses within machine, chemical or marine applications Perfect for service sectors, energy distribution panels and more.
1 products found
JPY: 2,250
USD: 15.37
-
Schneider Electric Harmony XAL Contact Block 1NC Screw terminal ZENL1121
IEC, JIS. UL, CSA. Schneider Electric / Harmony XAL Series (ZENL) / Contact Blocks ; Light Blocks. The Harmony XAL range of Contact ; Light Blocks by Schneider Electric offers you reliable performance across the range. The Harmony range is stress tested by Schneider Electric to ensure you get the highest quality, reliable product possible to ensure user safety. Features and benefits. Slow break contact operation in conjunction with pushbuttons for quicker action (depending on the speed of the operator). 1,000,000 cycles of mechanical durability, robust and reliable to ensure continuous operation. Lightweight, easy to fit and configure. Easily removable and adjustable. Front mounting. Operating temperature of between -40 to 70 °C. Check the datasheet for further information. Schneider Green Premium product as standard across the XB4 Contact block range. Environmentally friendlier than alternatives, easy to dispose of safely. 18 month warranty period with Schneider Electric. Protection ratings - IP20 conforming to IEC 60529 EN/IEC 60947-1, 60947-5-1 ; 60947-5-4. UL 508 ; CSA C22.2 No 14. Vibration resistance to 5 gn, suitable for a wide variety of areas that may require devices to be resistant to movement. This conforms to IECE 60068-2-6 Shock resistance to 30 gn (18 ms duration) conforming to IEC 60068-2-27. Applications -. Used in conjunction with push buttons, signal controllers. Applicable uses within machine, chemical or marine applications
1 products found
JPY: 2,480
USD: 16.94
-
Schneider Electric Harmony XB Legend for use with XALE Series, XALK Series, XB4 Series, XB5 Series, XLAD Series ZBY8130
EN/IEC 60204-1 and EN/ISO 13850:2006. Circular labels. Circular labels for mushroom type pushbuttons. Yellow.
1 products found
JPY: 780
USD: 5.33
-
Schneider Electric Thermal Overload Relay NO/NC, 16 → 24 A, 24 A LRD22
UL and CSA. Three-pole Thermal Overload Relays. Three-pole thermal overload relays designed to protect ac circuits against overloads, phase failure, long starting times and prolonged stalling of the motor. Adjustable relay setting dial Test button Stop button Manual/auto reset Trip indicator Sealable cover 1N/O ; 1N/C auxiliary contacts Direct mounting beneath three-pole contactors or independent mounting on DIN rail Insulation voltage 600V, Withstand Voltage 6kV
1 products found
JPY: 8,950
USD: 61.14
-
Schneider Electric Thermal Overload Relay NO/NC, 9 → 13 A, 13 A LRD16
UL and CSA. Three-pole Thermal Overload Relays. Three-pole thermal overload relays designed to protect ac circuits against overloads, phase failure, long starting times and prolonged stalling of the motor. Adjustable relay setting dial Test button Stop button Manual/auto reset Trip indicator Sealable cover 1N/O ; 1N/C auxiliary contacts Direct mounting beneath three-pole contactors or independent mounting on DIN rail Insulation voltage 600V, Withstand Voltage 6kV
1 products found
JPY: 7,020
USD: 47.96
-
Schneider Electric Overload Relay NO/NC, 2.5 → 4 A, 4 A LRD08
UL and CSA. Three-pole Thermal Overload Relays. Three-pole thermal overload relays designed to protect ac circuits against overloads, phase failure, long starting times and prolonged stalling of the motor. Adjustable relay setting dial Test button Stop button Manual/auto reset Trip indicator Sealable cover 1N/O ; 1N/C auxiliary contacts Direct mounting beneath three-pole contactors or independent mounting on DIN rail Insulation voltage 600V, Withstand Voltage 6kV
1 products found
JPY: 6,670
USD: 45.57
-
Schneider Electric Overload Relay NO/NC, 1.6 → 2.5 A, 2.5 A LRD07
UL and CSA. Three-pole Thermal Overload Relays. Three-pole thermal overload relays designed to protect ac circuits against overloads, phase failure, long starting times and prolonged stalling of the motor. Adjustable relay setting dial Test button Stop button Manual/auto reset Trip indicator Sealable cover 1N/O ; 1N/C auxiliary contacts Direct mounting beneath three-pole contactors or independent mounting on DIN rail Insulation voltage 600V, Withstand Voltage 6kV
1 products found
JPY: 6,670
USD: 45.57
-
Schneider Electric Overload Relay NO/NC, 1 → 1.6 A, 1.6 A LRD06
UL and CSA. Three-pole Thermal Overload Relays. Three-pole thermal overload relays designed to protect ac circuits against overloads, phase failure, long starting times and prolonged stalling of the motor. Adjustable relay setting dial Test button Stop button Manual/auto reset Trip indicator Sealable cover 1N/O ; 1N/C auxiliary contacts Direct mounting beneath three-pole contactors or independent mounting on DIN rail Insulation voltage 600V, Withstand Voltage 6kV
1 products found
JPY: 6,670
USD: 45.57
-
Schneider Electric 3 Pole Contactor, 18 A, 24 V dc Coil, TeSys D, 3NO, 7.5 kW LC1D18BD
Schneider Electric LC1D TeSys D Contactors. TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Bidirectional peak limiting diode suppressor to protect the coil Easily installed accessories Flexible control circuit to suit a wide range of applications. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. What accessories are available?. Auxiliary contact blocks with serrated wiping action Front mount dust tight auxiliary contact blocks Pneumatic time delay blocks Transient voltage surge suppressors Interface modules and electronic timers Mechanical latching blocks. Is the TeSys D range a double break pole type contactor?. Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 14,560
USD: 99.47
-
Schneider Electric 3 Pole Contactor, 18 A, 24 V ac Coil, TeSys D, 3NO, 7.5 kW LC1D18B7
Schneider Electric LC1D TeSys D Contactors. TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Bidirectional peak limiting diode suppressor to protect the coil Easily installed accessories Flexible control circuit to suit a wide range of applications. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. What accessories are available?. Auxiliary contact blocks with serrated wiping action Front mount dust tight auxiliary contact blocks Pneumatic time delay blocks Transient voltage surge suppressors Interface modules and electronic timers Mechanical latching blocks. Is the TeSys D range a double break pole type contactor?. Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 8,420
USD: 57.52
-
Schneider Electric 3 Pole Contactor, 12 A, 24 V dc Coil, TeSys D, 3NO, 5.5 kW LC1D12BD
Schneider Electric LC1D TeSys D Contactors. TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Bidirectional peak limiting diode suppressor to protect the coil Easily installed accessories Flexible control circuit to suit a wide range of applications. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. What accessories are available?. Auxiliary contact blocks with serrated wiping action Front mount dust tight auxiliary contact blocks Pneumatic time delay blocks Transient voltage surge suppressors Interface modules and electronic timers Mechanical latching blocks. Is the TeSys D range a double break pole type contactor?. Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 11,050
USD: 75.49
-
Schneider Electric 3 Pole Contactor, 12 A, 24 V ac Coil, TeSys D, 3NO, 5.5 kW LC1D12B7
Schneider Electric LC1D TeSys D Contactors. TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Bidirectional peak limiting diode suppressor to protect the coil Easily installed accessories Flexible control circuit to suit a wide range of applications. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. What accessories are available?. Auxiliary contact blocks with serrated wiping action Front mount dust tight auxiliary contact blocks Pneumatic time delay blocks Transient voltage surge suppressors Interface modules and electronic timers Mechanical latching blocks. Is the TeSys D range a double break pole type contactor?. Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 6,320
USD: 43.18
-
Schneider Electric 3 Pole Contactor, 9 A, 230 V ac Coil, TeSys D, 3NO, 4 kW LC1D09P7
Schneider Electric LC1D TeSys D Contactors. TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Bidirectional peak limiting diode suppressor to protect the coil Easily installed accessories Flexible control circuit to suit a wide range of applications. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. What accessories are available?. Auxiliary contact blocks with serrated wiping action Front mount dust tight auxiliary contact blocks Pneumatic time delay blocks Transient voltage surge suppressors Interface modules and electronic timers Mechanical latching blocks. Is the TeSys D range a double break pole type contactor?. Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 5,120
USD: 34.98
-
Schneider Electric 3 Pole Contactor, 9 A, 24 V dc Coil, TeSys D, 3NO, 4 kW LC1D09BD
Schneider Electric LC1D TeSys D Contactors. TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Bidirectional peak limiting diode suppressor to protect the coil Easily installed accessories Flexible control circuit to suit a wide range of applications. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. What accessories are available?. Auxiliary contact blocks with serrated wiping action Front mount dust tight auxiliary contact blocks Pneumatic time delay blocks Transient voltage surge suppressors Interface modules and electronic timers Mechanical latching blocks. Is the TeSys D range a double break pole type contactor?. Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 13,490
USD: 92.16
-
Schneider Electric 3 Pole Contactor, 9 A, 24 V ac Coil, TeSys D, 3NO, 4 kW LC1D09B7
Schneider Electric LC1D TeSys D Contactors. TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards. Features and Benefits. Built-in auxiliary contacts for added switching capability Screw connections: IP20 finger-safe terminals with both North American and International terminal markings Can be panel mounted with screws or DIN Rail mounted Bidirectional peak limiting diode suppressor to protect the coil Easily installed accessories Flexible control circuit to suit a wide range of applications. What does the utilisation category AC1 and AC3 mean for the TeSys contactors?. Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution. AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units. What accessories are available?. Auxiliary contact blocks with serrated wiping action Front mount dust tight auxiliary contact blocks Pneumatic time delay blocks Transient voltage surge suppressors Interface modules and electronic timers Mechanical latching blocks. Is the TeSys D range a double break pole type contactor?. Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
1 products found
JPY: 5,450
USD: 37.23
-
TeSys D Series Analogue (ON Delay) Pneumatic Timer, Range 0.1 → 30s, NO/NC Contacts LADT2
Pneumatic Timers. 1N/O + 1N/C timed auxiliary contacts Front, vertical mounting On delay, off delay versions
1 products found
JPY: 12,100
USD: 82.66
-
TeSys D Series Analogue (ON Delay) Pneumatic Timer, Range 0.1 → 3s, NO/NC Contacts LADT0
Pneumatic Timers. 1N/O + 1N/C timed auxiliary contacts Front, vertical mounting On delay, off delay versions
1 products found
JPY: 12,100
USD: 82.66