Microchip

RN-SMA-4 Microchip - Whip WiFi Antenna, Direct Mount, (2.4 GHz) SMA Connector　RN-SMA-4

Microchip RN-SMA4 Wi-Fi Antenna. The Microchip RN-SMA4 is a 4in. antenna with reverse polarity (male) SMA connector for WiFi and Bluetooth. Centre frequency: 2.45GHz Bandwidth: 120MHz Wavelength: 1/2-wave VSWR: ;1.9 typical at centre Impedance: 50 ohms Gain: 2.20dBi Connector: SMA Tilts and rotates Omni-directional pattern Fully weatherized Rugged and damage-resistant

Microchip

RN-SMA-S Microchip - Stubby WiFi Antenna, Direct Mount, (2.4 GHz) SMA Connector　RN-SMA-S

Microchip RN-SMA-S Antenna. The Microchip RN-SMA-S is a 1in. stub antenna with male or reverse polarity (female) SMA connectors. Centre frequency: 2.45GHz Connector: Male SMA (RS 798-5374), Female RP SMA (RS 798-5377)

Microchip

RN-SMA-S-RP Microchip - Stubby WiFi Antenna, Direct Mount, (2.4 GHz) SMA RP Connector　RN-SMA-S-RP

Microchip RN-SMA-S Antenna. The Microchip RN-SMA-S is a 1in. stub antenna with male or reverse polarity (female) SMA connectors. Centre frequency: 2.45GHz Connector: Male SMA (RS 798-5374), Female RP SMA (RS 798-5377)

Microchip

［Out of stock］Microchip RN4020-V/RMBEC133 Bluetooth Chip V4.1　RN4020-V/RMBEC133

Microchip

［Discontinued］TRF1001 Microchip - Stubby WiFi Antenna, Direct Mount, IPEX Connector　TRF1001

Aristotle External Antennas, Microchip. The TRF1001 (2dBi) and TRF1002 (5dBi) external antennas from Aristotle Enterprises are suitable for 2.54 GHz WiFi, ZigBee and MiWi. They include a right angle swivel connection that fits into a panel sleeve with 2 panel sleeves included for 1 mm and 1.5 mm thicknesses. The antennas also have a 150 mm long cable with an I-PEX connector on the end.

Microchip

［Discontinued］Microchip BM70BLES1FC2-0002AA Bluetooth Chip 4.2　BM70BLES1FC2-0002AA

This is for the wireless module products only. BM70BLES1FC2 models have an Integrated Antenna BM70BLE01FC2 models require an External Antenna. BM70 Bluetooth 4.2 Low Energy Module. The Microchip BM70 is a Bluetooth 4.2 Low-Energy (BLE) Module for adding Bluetooth 4.2 connectivity into designs. For simple integration, the module interfaces with a host Processor or Microcontroller via standard UART and has an integrated Bluetooth stack. Features. Class 2 Bluetooth® Smart 4.2 BLE-compliant Module Small and compact surface mount module 1.9V-3.6 V operating range UART/ I2C/ SPI interface Supports transparent UART data service of BLE 3 channel PWM Integrated 32 MHz Crystal Precision Temperature Sensor 12-bit Analogue-to-Digital Converter (ADC) – 8 channels 18 GPIOs Wake up by any GPIO Peak current: Transmit (Tx) 13 mA, Receive (Rx) 13 mA with VBAT @ 3.0 V. RF Features. ISM Band 2.402 GHz to 2.480 GHz operation Channels: 0-39 Receive (Rx) Sensitivity: -90 dBm (BLE typical) Transmit (Tx) Power: Class 2, +2 dBm (maximum) Received Signal Strength Indication (RSSI) Monitor with 1 dB resolution

Microchip

［Discontinued］Microchip RN42SM-I/RM Bluetooth Chip 2.1 + EDR　RN42SM-I/RM

Bluetooth, FCC, IC, EN. RN42 Bluetooth module also available separately under RS Part No. ; 765-2879 765-2879. RN-42-SM Bluetooth 2.1 + EDR Class 2 Socket Module. The RN42-SM is a through-hole PCB module featuring the RN42 Bluetooth Class 2 radio designed for OEMs adding wireless capability to their products. The RN42 is perfect for battery powered applications and by default is ready to use in the SPP (Serial Port Profile) configuration. It uses only 250μA in sleep mode while still being discoverable and connectable. Multiple low power modes available allow you to dial in the lowest power profile for your application. RN42-SM Socket Module RN42 Bluetooth module RS-232 serial interface with RTS/CTS flow control Jumper link header for: Default Baudrate, Auto Discovery, Auto Master and Factory Reset 2 x Status LEDs On-board +3.3V regulator Dimensions: 33 x 23mm RN42 Class 2 Bluetooth module Bluetooth 2.1 + EDR (Enhanced Data Rate) transceiver module Backwards-compatible with Bluetooth 2.0, 1.2 and 1.1 RF Frequency Range: 2.402 to 2.480GHz with 79 channels Modulation: GFSK with FHSS RF Output Power: +4dBm Receiver Sensitivity: -80dBm Host communication: serial UART with RTS/CTS flow control Sustained SPP data rates: 240kbps (slave), 300kbps (master) Embedded Bluetooth stack: GAP, SDP, RFCOMM and L2CAP protocols, with SPP and DUN profile support AES-128 encryption PCB antenna Power supply: +3.0V to +3.6Vdc Operating temperature range: -40 to +85°C Applications: Cable replacement, Barcode scanners, Measurement ; monitoring systems, Industrial sensors ; controls, Medical devices

Microchip

［Discontinued］Microchip RN1810E-I/RM100 3.15 → 3.45V WiFi Module, 802.11b, 802.11g, 802.11n UART　RN1810E-I/RM100

RN1810/RN1810E 802.11b/g/n WiFi Module. The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier. The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections. Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna. Features. Fully integrated Low-Power IEEE 802.11b/g/n WiFi module UART Interface to Host Controller Configured using simple ASCII Commands Integrates easily into final product PCB Trace Antenna (RN1810) or W.FL Connector for an External Antenna (RN1810E) Compact surface mount module: 17.8 x 26.7 x 2.2 mm Castellated Surface Mount Pads for reliable PCB mounting FCC, IC, European R ;TTE, Australia/New Zealand, Korea, Taiwan ; Japan certified RoHS compliant. Low-Power Features. Rx Mode Consumption: 64 mA (typical) Tx Mode Consumption: 246 mA at 18 dBm (typical) Power-Saving Sleep Mode: 12 μA (typical)

Microchip

［Discontinued］Microchip RN1810-I/RM100 3.15 → 3.45V WiFi Module, 802.11b, 802.11g, 802.11n UART　RN1810-I/RM100

RN1810/RN1810E 802.11b/g/n WiFi Module. The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier. The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections. Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna. Features. Fully integrated Low-Power IEEE 802.11b/g/n WiFi module UART Interface to Host Controller Configured using simple ASCII Commands Integrates easily into final product PCB Trace Antenna (RN1810) or W.FL Connector for an External Antenna (RN1810E) Compact surface mount module: 17.8 x 26.7 x 2.2 mm Castellated Surface Mount Pads for reliable PCB mounting FCC, IC, European R ;TTE, Australia/New Zealand, Korea, Taiwan ; Japan certified RoHS compliant. Low-Power Features. Rx Mode Consumption: 64 mA (typical) Tx Mode Consumption: 246 mA at 18 dBm (typical) Power-Saving Sleep Mode: 12 μA (typical)

Microchip

［Discontinued］TRF1002 Microchip - Stubby WiFi Antenna, Direct Mount, IPEX Connector　TRF1002

Aristotle External Antennas, Microchip. The TRF1001 (2dBi) and TRF1002 (5dBi) external antennas from Aristotle Enterprises are suitable for 2.54 GHz WiFi, ZigBee and MiWi. They include a right angle swivel connection that fits into a panel sleeve with 2 panel sleeves included for 1 mm and 1.5 mm thicknesses. The antennas also have a 150 mm long cable with an I-PEX connector on the end.

Microchip

［Discontinued］Microchip MRF24WN0MA-I/RM100 3.15 → 3.45V WiFi Module, 802.11b/g/n SPI　MRF24WN0MA-I/RM100

MRF24WN0MA/MB 2.4 GHz 802.11b/g/n Wireless Modules. The Microchip MRF24WN0 is a family of 2.4GHz 802.11b/g/n Wireless Modules that integrate all the required RF components into one compact form factor. The module includes a Voltage Regulator, Crystal Oscillator, RF Matching Circuitry, Power Amplifier (PA), Low Noise Amplifier (LNA) and encryption support. Provided is a 4-wire SPI with which to interface to a host controller. Two module variants are available; the MRF24WN0MA with Integral Antenna and the MRF24WN0MB with External Antenna Connection. Features. Fully integrated wireless module IEEE 802.11b/g/n compliant transceiver 2.4 GHz IEEE 802.11n Single Stream 1x1 4-Wire SPI Interface to Host Controller (including interrupt) Works with Microchip's MPLAB® Harmony Integrated Software Framework Compact surface mount module: 17.8 mm x 26.7 mm x 2.2 mm Castellated surface mount pads for easy and reliable PCB mounting Environmentally friendly, RoHS compliant

Microchip

［Discontinued］Microchip RN171-I/RM475 3.3V WiFi Module ASCII, GPIO, ISP, SPI, UART　RN171-I/RM475

RN-171 802.11b/g WiFi Modules. The Microchip RN171 is a compact 802.11b/g WiFi Module that simplifies adding WiFi connectivity into designs. The module integrates all the required hardware with an on-board TCP/IP stack to provide a full featured 802.11b/g module. Configuration of the RN171 is via simple ASCII commands over UART. The Power Management features of the RN171 are ideal for portable, battery powered applications. The module features Battery Boost Circuitry and in Sleep Mode consumes only 4 μA. Device Features. Complete, Embedded 2.4 GHz IEEE 802.11b/g Wireless LAN Module 14 GPIO Pins (Four GPIOs shared with UART) Eight Analogue Sensor Inputs Compact Form Factor: 26.67 x 17.78 x 3.18 mm Integrated Crystal, Internal Voltage Regulator, Matching Circuitry, Power Amplifier Configured using Simple ASCII Commands Supports Infrastructure and SoftAp Networking Modes Built-in Networking Applications: TCP, UDP, DHCP, DNS, ICMP, ARP, HTTP Client, and FTP Client Complete On-Board TCP/IP Networking Stack Unique MAC Address Upgrade Firmware Over the Air using FTP Supports WiFi Protected Setup (WPS) Security: WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES). RF Features. Frequency: 2.412 to 2.462 GHz 802.11b Modulation Compatibility: DSSS (CCK-11, CCK-5.5, DQPSK-2, DBPSK-1) 802.11g Modulation Compatibility: OFDM Receive (Rx) Sensitivity: -83 dBm (typical) Power Output: 0 to +12 dBm. Power Management Features. Ultra Low-Power Sleep Mode (4 μA) Battery Boost Control Circuitry Real-Time Clock for Time Stamping, Auto-Sleep, and Auto-Wake

Microchip

［Discontinued］Microchip ATSAMB11-ZR210CA Bluetooth Chip V4.1　ATSAMB11-ZR210CA

Microchip

［Out of stock］Microchip RN4020-V/RMBEC133 Bluetooth Chip V4.1　RN4020-V/RMBEC133