Renesas Electronics

H8S microcomputer　R4F2125VTF20V

Cypress Semiconductor

Cypress Semiconductor CY8C4245AXI-483, CMOS System-On-Chip for Automotive, Capacitive Sensing, Controller, Embedded,　CY8C4245AXI-483

PSoC 4 (ARM Cortex-M0 Core), Cypress. The Cypress Semiconductor PSoC 4 (Programmable Embedded System-on-Chip) family contain an ARM Cortex-M0 processor both product families 4100 and the 4200 platform architecture feature a combination of a microcontroller with op amps with Comparator mode, digital programmable logic, A/D converter as well as communication and timing devices. In the PSoC4 platform the controllers are compatible with each other for designing and new applications.. 32-bit MCU Sub-system 24 MHz ARM Cortex-M0 CPU with single-cycle multiply ( PSoC 4100 Family) 48 MHz ARM Cortex-M0 CPU with single cycle multiply ( PSoC 4200 family) Up to 32 kB of flash with Read Accelerator Up to 4 kB of SRAM /SRAM+ Compatible with members of the PSoC 4 platform

Cypress Semiconductor

Cypress Semiconductor CY8C5868AXI-LP035, CMOS System-On-Chip for Automotive, Capacitive Sensing, Controller, Embedded,　CY8C5868AXI-LP035

PSoC 5LP (ARM Cortex-M3 Core), Cypress. The Cypress Semiconductor PSoC 5LP (Programmable Embedded System-on-Chip) incorporates configurable memory, microcontroller (MCU), analogue and digital peripherals all on one chip (IC). The PSoC 5LP platform architecture has a 32-bit ARM Cortex-M3 core along with direct memory access (DMA) controller and digital filter processor up to 80 MHz.. Flexible routing Wide voltage range

Microchip

Microchip PIC18F27K40-I/SP, 8bit PIC18 Microcontroller, 64MHz, 128 kB Flash, 28-Pin SDIP　PIC18F27K40-I/SP

PIC18F27/47K40 8-bit Low Power Microcontrollers. Microchip Technology PIC18F27K40 & PIC18F47K40 microcontrollers combine large Flash/EE/RAM memory, rich peripheral integration, eXtreme Low-Power (XLP) technology and 5V support resulting in MCUs suited to a variety of general purpose applications. These devices include 128KB flash memories and are housed in 28 or 40-pin DIP packages. PIC18 MCU core with 83 instructions, 31 stack levels Internal 64MHz oscillator Operating voltage: 2.3 to 5.5V 128 KB Flash program memory with self-read/write capability 10-bit ADC with 24 input channels (35 channels for PIC18F47K40) 5-bit DAC, 2 x Comparator, 1 x Zero-cross detect Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders Communications: 2 x I2C/SPI and 2 x EUSART with LIN support In-circuit debug integrated on-chip In-circuit serial programing (ICSP) via two pins See manufacturer s datasheet for full list of features

Microchip

Microchip PIC18F47K40-I/P, 8bit PIC18 Microcontroller, 64MHz, 128 kB Flash, 40-Pin DIP　PIC18F47K40-I/P

PIC18F27/47K40 8-bit Low Power Microcontrollers. Microchip Technology PIC18F27K40 & PIC18F47K40 microcontrollers combine large Flash/EE/RAM memory, rich peripheral integration, eXtreme Low-Power (XLP) technology and 5V support resulting in MCUs suited to a variety of general purpose applications. These devices include 128KB flash memories and are housed in 28 or 40-pin DIP packages. PIC18 MCU core with 83 instructions, 31 stack levels Internal 64MHz oscillator Operating voltage: 2.3 to 5.5V 128 KB Flash program memory with self-read/write capability 10-bit ADC with 24 input channels (35 channels for PIC18F47K40) 5-bit DAC, 2 x Comparator, 1 x Zero-cross detect Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders Communications: 2 x I2C/SPI and 2 x EUSART with LIN support In-circuit debug integrated on-chip In-circuit serial programing (ICSP) via two pins See manufacturer s datasheet for full list of features

Microchip

Microchip PIC18F46K40-I/P, 8bit PIC18 Microcontroller, 64MHz, 64 kB Flash, 40-Pin DIP　PIC18F46K40-I/P

PIC18F26/45/46K40 8-bit Low Power Microcontrollers. The PIC18F46K40 low power microcontroller from Microchip Technology combines a large Flash/EE/RAM memory, rich core-independent peripheral integration, eXtreme Low-Power (XLP) technology and 5V support to suit a variety of general purpose and low power applications. The PIC18F46K40 has 64KB of Flash program memory and is housed in a DIP40 package. PIC18 core with 3-level hardware stack and 83 instructions Internal 64MHz oscillator Operating voltage: 2.3 to 5.5V 64 KB Flash program memory with self-read/write capability 35-channel 10-bit ADC, 5-bit DAC and 2 comparators Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders 1 x Zero-cross detect Communications: 2 x I2C/SPI and 2 x EUSART with LIN support In-circuit debug integrated on-chip In-circuit serial programing (ICSP) via two pins

Microchip

Microchip Technology AT89S52-24PU, 8bit 8051 Microcontroller, 24MHz, 8 kB Flash, 40-Pin PDIP　AT89S52-24PU

8051 Architecture Flash ISP (In-System Programmable) Microcontrollers, Atmel. Atmel offers Flash 8051 microcontrollers featuring In-System Programming (ISP) that they can be programmed with the appropriate software, either in parallel or in serial mode.

Microchip

Microchip Technology ATMEGA168-20PU, 8bit AVR Microcontroller, 20MHz, 16 kB Flash, 28-Pin PDIP　ATMEGA168-20PU

8-Bit megaAVR Microcontrollers, 4KB to 16KB Flash. Here at RS Components we have numerous megaAVR 8-bit microcontrollers from Atmel.Each microcontroller is based on an enhanced RISC architecture and features QTouch library support. All of the megaAVR microcontrollers have varying Kb of In-System Programmable Flash, EEPROM and SRAM as well as a variety of pin and package types. Types of megaAVR 8-bit microcontrollers ATmega8 ATmega16 ATmega48 ATmega88 ATmega162 ATmega164 ATmega165 ATmega168 ATmega8515 ATmega8535

Microchip

Microchip Technology ATMEGA328-AU, 8bit AVR Microcontroller, 20MHz, 32 kB Flash, 32-Pin TQFP　ATMEGA328-AU

ATmega328 8-Bit megaAVR Microcontrollers. The Atmel ATmega328 Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle the ATmega328 achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and speed. Microcontroller Features. 20 MHz Max. Operating Frequency Up to 20 MIPS at 20 MHz 32 KB Flash 1024 B EEPROM 2 KB SRAM 131 Instructions – Most single clock cycle execution 32 General Purpose Registers 23 GPIO Power-on Reset and Programmable Brown-out Detection Internal Calibrated Oscillator External and Internal Interrupt Sources Five Power-Saving Sleep Modes Internal and External Interrupts Fully Static Operation. Peripheral Features. 10-bit 15 ksps Analogue-to-Digital Converter (ADC) – 8 or 6 channels Capacitive Touch Sense – 16 channels Temperature Sensor Two 8-bit Timers One 16-bit Timer Output Compare Module – 6 channels Six PWM Channels Programmable Serial USART Master/Slave SPI Serial Interface Byte-oriented 2-wire Serial Interface – I2C compatible Programmable Watchdog Timer with Separate Oscillator Analogue Comparator Interrupt and Wake-up on Pin Change

Microchip

Microchip Technology ATMEGA328P-AN, 8bit AVR Microcontroller, 20MHz, 32 kB Flash, 32-Pin TQFP　ATMEGA328P-AN

ATmega328P 8-Bit megaAVR picoPower Microcontrollers. The Atmel ATmega328P Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. Featured is picoPower technology that offers ultra-low power consumption and low-power sleep modes, ideal for battery powered applications. Microcontroller Features. ;20 MHz Max. Operating Frequency ;Up to 20 MIPS at 20 MHz ;32 KB Flash ;1024 B EEPROM ;2 KB SRAM ;131 Instructions – Most single clock cycle execution ;32 General Purpose Registers ;23 GPIO ;Power-on Reset and Programmable Brown-out Detection ;Internal Calibrated Oscillator ;External and Internal Interrupt Sources ;Six Power-Saving Sleep Modes ;Internal and External Interrupts ;Fully Static Operation. Peripheral Features. ;10-bit 15 ksps Analogue-to-Digital Converter (ADC) – 8 or 6 channels ;Capacitive Touch Sense – 16 channels ;Temperature Sensor ;Two 8-bit Timers ;One 16-bit Timer ;Output Compare Module – 6 channels ;Six PWM Channels ;Programmable Serial USART ;Master/Slave SPI Serial Interface ;Byte-oriented 2-wire Serial Interface – I2C compatible ;Programmable Watchdog Timer with Separate Oscillator ;Analogue Comparator ;Interrupt and Wake-up on Pin Change

Microchip

Microchip Technology ATMEGA328P-PN, 8bit AVR Microcontroller, 20MHz, 32 kB Flash, 28-Pin PDIP　ATMEGA328P-PN

ATmega328P 8-Bit megaAVR picoPower Microcontrollers. The Atmel ATmega328P Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. Featured is picoPower technology that offers ultra-low power consumption and low-power sleep modes, ideal for battery powered applications. Microcontroller Features. ;20 MHz Max. Operating Frequency ;Up to 20 MIPS at 20 MHz ;32 KB Flash ;1024 B EEPROM ;2 KB SRAM ;131 Instructions – Most single clock cycle execution ;32 General Purpose Registers ;23 GPIO ;Power-on Reset and Programmable Brown-out Detection ;Internal Calibrated Oscillator ;External and Internal Interrupt Sources ;Six Power-Saving Sleep Modes ;Internal and External Interrupts ;Fully Static Operation. Peripheral Features. ;10-bit 15 ksps Analogue-to-Digital Converter (ADC) – 8 or 6 channels ;Capacitive Touch Sense – 16 channels ;Temperature Sensor ;Two 8-bit Timers ;One 16-bit Timer ;Output Compare Module – 6 channels ;Six PWM Channels ;Programmable Serial USART ;Master/Slave SPI Serial Interface ;Byte-oriented 2-wire Serial Interface – I2C compatible ;Programmable Watchdog Timer with Separate Oscillator ;Analogue Comparator ;Interrupt and Wake-up on Pin Change

Microchip

Microchip Technology ATMEGA328P-PU, 8bit AVR Microcontroller, 20MHz, 32 kB Flash, 28-Pin PDIP　ATMEGA328P-PU

ATmega328P 8-Bit megaAVR picoPower Microcontrollers. The Atmel ATmega328P Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. Featured is picoPower technology that offers ultra-low power consumption and low-power sleep modes, ideal for battery powered applications. Microcontroller Features. ;20 MHz Max. Operating Frequency ;Up to 20 MIPS at 20 MHz ;32 KB Flash ;1024 B EEPROM ;2 KB SRAM ;131 Instructions – Most single clock cycle execution ;32 General Purpose Registers ;23 GPIO ;Power-on Reset and Programmable Brown-out Detection ;Internal Calibrated Oscillator ;External and Internal Interrupt Sources ;Six Power-Saving Sleep Modes ;Internal and External Interrupts ;Fully Static Operation. Peripheral Features. ;10-bit 15 ksps Analogue-to-Digital Converter (ADC) – 8 or 6 channels ;Capacitive Touch Sense – 16 channels ;Temperature Sensor ;Two 8-bit Timers ;One 16-bit Timer ;Output Compare Module – 6 channels ;Six PWM Channels ;Programmable Serial USART ;Master/Slave SPI Serial Interface ;Byte-oriented 2-wire Serial Interface – I2C compatible ;Programmable Watchdog Timer with Separate Oscillator ;Analogue Comparator ;Interrupt and Wake-up on Pin Change

Microchip

Microchip Technology ATMEGA328-PU, 8bit AVR Microcontroller, 20MHz, 32 kB Flash, 28-Pin PDIP　ATMEGA328-PU

ATmega328 8-Bit megaAVR Microcontrollers. The Atmel ATmega328 Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle the ATmega328 achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and speed. Microcontroller Features. 20 MHz Max. Operating Frequency Up to 20 MIPS at 20 MHz 32 KB Flash 1024 B EEPROM 2 KB SRAM 131 Instructions – Most single clock cycle execution 32 General Purpose Registers 23 GPIO Power-on Reset and Programmable Brown-out Detection Internal Calibrated Oscillator External and Internal Interrupt Sources Five Power-Saving Sleep Modes Internal and External Interrupts Fully Static Operation. Peripheral Features. 10-bit 15 ksps Analogue-to-Digital Converter (ADC) – 8 or 6 channels Capacitive Touch Sense – 16 channels Temperature Sensor Two 8-bit Timers One 16-bit Timer Output Compare Module – 6 channels Six PWM Channels Programmable Serial USART Master/Slave SPI Serial Interface Byte-oriented 2-wire Serial Interface – I2C compatible Programmable Watchdog Timer with Separate Oscillator Analogue Comparator Interrupt and Wake-up on Pin Change

Microchip

Microchip Technology ATMEGA32U4-AU, 8bit AVR Microcontroller, 16MHz, 32 kB Flash, 44-Pin TQFP　ATMEGA32U4-AU

ATmega32U4 8-Bit megaAVR Microcontrollers. The Atmel ATmega32U4 Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle the ATmega32U4 achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and speed. The ATmega32U4 features a USB 2.0 Device Module making it an ideal candidate for applications requiring USB connectivity. Also integrated is a JTAG interface for on-chip debug. Microcontroller Features. 16 MHz Max. Operating Frequency Up to 16 MIPS at 16 MHz 32 KB Flash 1024 B EEPROM 2.5 KB SRAM 135 Instructions – Most single clock cycle execution 32 General Purpose Registers 26 GPIO Power-on Reset and Programmable Brown-out Detection Internal 8 MHz Calibrated Oscillator Internal Clock Prescaler and On-the-fly Clock Switching External and Internal Interrupt Sources Six Power-Saving Sleep Modes Internal and External Interrupts Fully Static Operation On-Chip 2-cycle Multiplier. Communication Features. USB 2.0 Full-speed/Low Speed Device Module JTAG (IEEE1149.1 compliant) Interface Programmable Serial USART with Hardware Flow Control Master/Slave SPI Serial Interface Byte Oriented 2-wire Serial Interface. Peripheral Features. On-chip PLL for USB and High-Speed Timer 10-bit Analogue-to-Digital Converter (ADC) – 12 Channel One 10-bit High-Speed Timer/Counter with PLL (64 MHz) and Compare Mode One 8-bit Timer/Counter with Separate Prescaler and Compare Mode Two 16-bit Timers/Counters with Separate Prescaler, Compare and Capture Mode Four 8-bit PWM Channels Four PWM Channels with Programmable Resolution from 2 bits to 16 bits Six PWM Channels for High-Speed Operation, with Programmable Resolution from 2 bits to 11 bits Output Compare Modulator Programmable Watchdog Timer with Separate On-chip Oscillator On-chip Analogue Comparator Interrupt and Wake-up on Pin Change On-chip Temperature Sensor

Microchip

Microchip Technology ATTINY13A-PU, 8bit AVR Microcontroller, 20MHz, 1 kB Flash, 8-Pin PDIP　ATTINY13A-PU

8-Bit PicoPower tinyAVR® Microcontrollers. Atmel's tinyAVR® devices are optimized for applications that require performance, power efficiency, and ease-of-use in a small package. All picoPower devices are designed from the ground up for lowest possible power consumption. Small, most compact package for applications where size is critical Capacitive Touch Fast and code efficient High integration 1.8V to 5.5V operation (0.7V operation for ATtiny43U)

Microchip

Microchip ATTINY841-SSU, 8bit AVR Microcontroller, 16MHz, 8 kB Flash, 14-Pin SOIC　ATTINY841-SSU

8-Bit tinyAVR® Microcontrollers. Atmel's tinyAVR® devices are optimized for applications that require performance, power efficiency, and ease-of-use in a small package. Small for applications where size is critical Capacitive Touch Fast and code efficient High integration 1.8V to 5.5V operation (ATtiny43U)

Microchip

Microchip Technology ATTINY84A-PU, 8bit AVR Microcontroller, 20MHz, 8 kB Flash, 14-Pin PDIP　ATTINY84A-PU

8-Bit tinyAVR® Microcontrollers. Atmel's tinyAVR® devices are optimized for applications that require performance, power efficiency, and ease-of-use in a small package. Small for applications where size is critical Capacitive Touch Fast and code efficient High integration 1.8V to 5.5V operation (ATtiny43U)

Microchip

Microchip Technology ATTINY85-20PU, 8bit AVR Microcontroller, 20MHz, 8 kB Flash, 8-Pin PDIP　ATTINY85-20PU

ATtiny85 8-Bit tinyAVR Microcontrollers. The Atmel ATtiny85 Microcontroller is an 8-bit device based on the AVR enhanced RISC architecture. Being an Atmel tinyAVR device the ATtiny85 is packs performance and power efficiency into a small package, perfect for applications where space is at a premium. By executing powerful instructions in a single clock cycle the ATtiny85 achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and speed. Microcontroller Features. 20 MHz Max. Operating Frequency 8 KB Flash 512 Bytes EEPROM 0.5 KB SRAM 120 Instructions – Most single clock cycle execution 32 General Purpose Registers 6 GPIO debugWIRE On-chip Debug System In-System Programmable via SPI Port External and Internal Interrupt Sources Low Power Idle, ADC Noise Reduction, and Power-down Modes Enhanced Power-on Reset Circuit Programmable Brown-out Detection Circuit Internal Calibrated Oscillator. Peripheral Features. 8-bit Timer/Counter with Prescaler and Two PWM Channels 8-bit High-Speed Timer/Counter with Separate Prescaler Universal Serial Interface (USI) with Start Condition Detector 10-bit Analogue-to-Digital Converter – 4 Channels Programmable Watchdog Timer with Separate On-chip Oscillator On-chip Analogue Comparator

Microchip

Microchip Technology ATXMEGA32E5-AU, 8/16bit AVR Microcontroller, 32MHz, 32 + 4 kB Flash, 32-Pin TQFP　ATXMEGA32E5-AU

8/16-Bit AVR XMEGA Microcontrollers. Atmel AVR XMEGA microcontrollers deliver the best possible combination of real-time performance, high integration and low power consumption for 8/16-bit MCU applications. Atmel AVR XMEGA devices employ advanced analogue-to-digital converters (ADCs) that deliver both high speed and high resolution. These ADCs offer up to four conversion channels with different result registers, which can have different setup and configuration processes. This provides easier use since different software modules can access and use an ADC independently. The Event System facilitates inter-peripheral signaling for short and 100% predictable response time. This ensures real-time control, and also offloads the CPU because each time an event is used, one interrupt with context switch is eliminated. Most of the peripherals and the DMA controller are connected to the Event System. The AVR XMEGA E series features an asynchronous peripheral Event System instead. The AVR XMEGA 4-channel direct memory access (DMA) controller can be used for fast, CPU-independent data transfer between any combination of data memory and peripherals. AVR XMEGA devices use the Atmel AVR CPU. The instruction set and design of the CPU are tuned to minimize code size and maximize execution speed. Its true single-cycle execution of arithmetic and logic operations means AVR XMEGA microcontrollers perform close to 1MIPS per MHz. The fast-access register file with 32 x 8-bit general-purpose working registers is directly connected to the arithmetic logic unit (ALU). During a single clock cycle, the ALU can be fed two arbitrary registers, do a requested operation, and write back the result. It provides efficient support for 8-, 16- and 32-bit arithmetic.

Microchip

Microchip PIC18F67K40-I/PT, 8bit PIC18 Microcontroller, 64MHz, 128 kB Flash, 64-Pin TQFP　PIC18F67K40-I/PT

PIC18F6xK40 Low Power 8-bit Flash Microcontrollers. The PIC18(L)F65K40, PIC18(L)F66K40 and PIC18(L)F67K40 are 64-Pin, Low-Power 8-Bit Microcontrollers with Flash Memory from Microchip Technology. The combination of eXtreme Low-Power (XLP) technology with rich peripheral integration and large flash memory results in microcontrollers ideally suited to a wide range of low-power and general purpose applications. These devices are available in compact 64-pin QFN and TQFP packages with either 32 KB, 64 KB or 128 KB flash memory capacity. Low voltage versions are designated (PIC18LF65/PIC18LF66/PIC18LF67). PIC18 MCU core with 83 instructions, 31 stack levels 32 KB (PIC18F65), 64 KB (PIC18F66) or 128 KB (PIC18F67) Flash memory Internal 64 MHz oscillator Operating Voltage: (F) 2.3 V to 5.5 V; Low-Voltage (LF) 1.8 V to 3.6 V 47 x 10-bit ADC, 1 x 5-bit DAC, 3 x Comparators Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders Communications: 2 x I²C/SPI, 5 x EUSART with LIN support In-Circuit Debug Integrated on-chip In-Circuit Serial Programing (ICSP) via two pins

Microchip

Microchip ATSAMD51J20A-AU, 32bit ARM Cortex M4 Microcontroller, 120MHz, 1 MB Flash, 64-Pin TQFP　ATSAMD51J20A-AU

Microchip

Microchip PIC18F25K42-I/SS, 8bit 8 bit CPU Microcontroller, 64MHz, 32 kB Flash, 28-Pin SSOP　PIC18F25K42-I/SS

Microchip

Microchip PIC16F15323-I/ST, 8bit 8 bit CPU Microcontroller, 32MHz, 3.5 kB Flash, 14-Pin TSSOP　PIC16F15323-I/ST

Microchip

Microchip PIC16F18857-I/SP, 8bit 8 bit CPU Microcontroller, 32MHz, 56 kB Flash, 28-Pin SPDIP　PIC16F18857-I/SP

PIC16F1885x/1887x 8-Bit Microcontrollers. The PIC16F range of Microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options. PIC16F1885x/1887xx Microcontrollers are based on Microchip s Enhanced Mid-Range core and are the first to include multiple new Low-Power features. IDLE and DOZE modes have been added along with Peripheral Module Disable, this allows peripherals to be removed from the power rail and clock tree for zero power leakage. Additionally these devices are Microchip s first PIC MCUs to incorporate an Analogue-to-Digital Converter with computation (ADC2). Functions like accumulation, averaging and low-pass filter calculations are completed in the ADC hardware instead of the MCU software, freeing up the CPU to sleep or complete other tasks. Microcontroller Features. 32 MHz Max. CPU Speed 49 Instructions 16 Level Hardware Stack Internal Oscillator 25 or 36 I/O Pins Power-On Reset (POR) Configurable Power-Up Timer (PWRTE) Brown-Out Reset (BOR) and Low-Power Brown-Out Reset (LPBOR) Windowed Watchdog Timer (WWDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD) Low-Voltage Programming (LVP) Peripheral Pin Select (PPS). Power Saving Features. Peripheral Module Disable (PMD) – Ability to disable unused peripherals for minimal power consumption SLEEP, IDLE and DOZE Low Power Modes Sleep mode: 50 nA @ 1.8V (typical) Watchdog Timer: 500 nA @ 1.8V (typical) Secondary Oscillator: 500 nA @ 32 kHz Operating Current: 8 μA @ 32 kHz 1.8V (typical). Peripheral Features. 10-bit Analogue-to-Digital Converter with Computation (ADC2) – PIC16F18855 25 Channels; PIC16F18875 36 Channels 5-Bit Digital-to-Analogue Converter (DAC) Two Comparators (COMP) Voltage Reference Four Configurable Logic Cells (CLC) Complementary Waveform Generator (CWG): Five Capture/Compa10re/PWM (CCP) modules Two 10-bit PWMs Numerically Controlled Oscillator (NCO) Two Signal Measurement Timers (SMT) Cyclical Redundancy Check (CRC/SCAN) EUSART, RS-232, RS-485, LIN compatible Interfaces Two SPI Interfaces Two I2C, SMBus, PMBus™ Compatible Interfaces Data Signal Modulator (DSM) Three 8-bit Timers with Hardware Limit Timer (HLT) Four 16-bit Timers

Microchip

Microchip, 8bit PIC Microcontroller, 4MHz, 1K EPROM, 8-Pin PDIP　PIC12C509A-04/P

PIC12Cxxx 8-Bit Microcontrollers. This powerful (one micro (μ) second instruction execution) yet easy-to-program (only 33 single word instructions) CMOS OTP-based 8-bit microcontroller packs Microchip s powerful PIC® architecture into an 8-pin package. 6 I/O pins with 25mA source/sink per I/O, 4 oscillator selections including the internal 4MHz RC oscillator with programmable calibration, and Power-on Reset. All new designs should consider using PIC12F variants.

Microchip

Microchip, 8bit PIC Microcontroller, 4MHz, 1K EPROM, 18-Pin PDIP　PIC16C711-04/P

PIC16C71/710/711/715 8-Bit Microcontrollers. The PIC16C range of Microcontrollers from Microchip are 8-bit CMOS MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Now supplanted by Flash based variants these devices are still popular in legacy designs. For new applications PIC16F variants should be considered. The PIC16C71/710/711/715 family of Microcontrollers is based upon Microchip s mid-range architecture with an 8 level hardware stack and 35 14-bit instructions. These MCUs provide up to 5 MIPS, up to 3.5 Kbytes program memory with data memory up to 128 bytes RAM. On board is a RC oscillator. Features. 35 Instructions 8 Level Hardware Stack RC Oscillator 13 I/O Pins One 8-bit Timer 4 Channel 8-bit Analogue-to-Digital Converter Watchdog Timer (WDT) Power-on Reset (POR) Power-up Timer (PWRT) Oscillator Start-up Timer (OST) Brown-out Reset (BOR) – Except PIC16C71 Model In-Circuit Serial Programming (ICSP)

Microchip

Microchip PIC12C509A-04I/P, 8bit PIC Microcontroller, 4MHz, 1K EPROM, 8-Pin PDIP　PIC12C509A-04I/P

PIC12Cxxx 8-Bit Microcontrollers. This powerful (one micro (μ) second instruction execution) yet easy-to-program (only 33 single word instructions) CMOS OTP-based 8-bit microcontroller packs Microchip s powerful PIC® architecture into an 8-pin package. 6 I/O pins with 25mA source/sink per I/O, 4 oscillator selections including the internal 4MHz RC oscillator with programmable calibration, and Power-on Reset. All new designs should consider using PIC12F variants.

Microchip

Microchip PIC16C54C-04/P, 8bit PIC Microcontroller, 4MHz, 512 EPROM, 18-Pin PDIP　PIC16C54C-04/P

PIC16C5x 8-Bit Microcontrollers. The PIC16C range of Microcontrollers from Microchip are 8-bit CMOS MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Now supplanted by Flash based variants these devices are still popular in legacy designs. For new applications PIC16F variants should be considered. The PIC16C5x family of Microcontrollers is based upon Microchip s baseline architecture with a 2 level hardware stack and 33 12-bit instructions. These MCUs provide up to 10 MIPS, up to 3 Kbytes program memory with data memory of up to 73 bytes RAM. On board is a RC oscillator with ±1% accuracy. Features. 33 Instructions 2 Level Hardware Stack 12 I/O Pins on all models except PIC16C55/C55A/C57/C57C/CR57C 20 I/O Pins – PIC16C55/C55A/C57/C57C/CR57C One 8-bit Timer Watchdog Timer (WDT) Power-on Reset (POR) Device Reset Timer (DRT)

Microchip

Microchip PIC16F84-10/P, 8bit PIC Microcontroller, 10MHz, 1K x 14 words, 64 B Flash, 18-Pin PDIP　PIC16F84-10/P

PIC16F83/84 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F83/84 family of microcontrollers is based upon Microchip s Mid-range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 1.75 Kbytes program memory, up to 68 bytes RAM and 64 bytes EEPROM. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 13 I/O Pins Power-On Reset (POR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-Out Reset (BOR) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD). Peripherals. One 8-bit Timer

Microchip

Microchip PIC16F628-04/P, 8bit PIC Microcontroller, 4MHz, 128 x 8 words, 2048 x 14 words Flash, 18-Pin PDIP　PIC16F628-04/P

PIC16F627/628 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F627/628 family of microcontrollers is based upon Microchip s Mid-Range core with a 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 3.5 Kbytes program memory, 224 bytes RAM and Data EEPROM of up to 128 bytes. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 16 I/O Pins Power-On Reset (POR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-Out Reset (BOR) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP). Peripherals. Two Comparators Capture/Compare/PWM Module Two 8-bit Timers One 16-bit Timer Universal Synchronous Receiver Transmitter (USART)

Microchip

Microchip PIC16F84A-04/P, 8bit PIC Microcontroller, 4MHz, 1024 x 14 words, 64 x 14 words Flash, 18-Pin PDIP　PIC16F84A-04/P

PIC16F84A 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F84A family of microcontrollers is based upon Microchip s Mid-range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 1.75 Kbytes program memory, 68 bytes RAM and 64 bytes EEPROM. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 13 I/O Pins Power-On Reset (POR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-Out Reset (BOR) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP). Peripherals. One 8-bit Timer

Microchip

Microchip PIC16F84A-04I/P, 8bit PIC Microcontroller, 4MHz, 1024 x 14 words, 64 x 14 words Flash, 18-Pin PDIP　PIC16F84A-04I/P

PIC16F84A 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F84A family of microcontrollers is based upon Microchip s Mid-range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 1.75 Kbytes program memory, 68 bytes RAM and 64 bytes EEPROM. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 13 I/O Pins Power-On Reset (POR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-Out Reset (BOR) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP). Peripherals. One 8-bit Timer

Microchip

Microchip PIC16F84A-20/P, 8bit PIC Microcontroller, 20MHz, 1024 x 14 words, 64 x 14 words Flash, 18-Pin PDIP　PIC16F84A-20/P

PIC16F84A 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F84A family of microcontrollers is based upon Microchip s Mid-range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 1.75 Kbytes program memory, 68 bytes RAM and 64 bytes EEPROM. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 13 I/O Pins Power-On Reset (POR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-Out Reset (BOR) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP). Peripherals. One 8-bit Timer

Microchip

Microchip PIC16F872-I/SO, 8bit PIC Microcontroller, 20MHz, 2K x 14 words, 64 B Flash, 28-Pin SOIC　PIC16F872-I/SO

PIC16F872 8-Bit Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F872 family of microcontrollers is based upon Microchip s Mid-Range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, 3.5 Kbytes program memory, 128 bytes RAM and EEPROM of 64 bytes. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 22 I/O Pins Power-On Reset (POR) Brown-Out Reset (BOR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD). Peripherals. 5 Channel 10-bit Analogue-to-Digital Converter (ADC) Capture, Compare, PWM (CCP) Module Two 8-bit Timers One 16-bit Timer Synchronous Serial Port (SSP) with SPI and I2C

Microchip

Microchip PIC16F872-I/SP, 8bit PIC Microcontroller, 20MHz, 2K x 14 words, 64 B Flash, 28-Pin SPDIP　PIC16F872-I/SP

PIC16F872 8-Bit Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F872 family of microcontrollers is based upon Microchip s Mid-Range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, 3.5 Kbytes program memory, 128 bytes RAM and EEPROM of 64 bytes. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 22 I/O Pins Power-On Reset (POR) Brown-Out Reset (BOR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD). Peripherals. 5 Channel 10-bit Analogue-to-Digital Converter (ADC) Capture, Compare, PWM (CCP) Module Two 8-bit Timers One 16-bit Timer Synchronous Serial Port (SSP) with SPI and I2C

Microchip

Microchip PIC16F876-04/SP, 8bit PIC Microcontroller, 4MHz, 256 x 8 words, 8K x 14 words Flash, 28-Pin SPDIP　PIC16F876-04/SP

PIC16F873/874/876/877 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F873/874/876/877 family of microcontrollers is based upon Microchip s Mid-Range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, 3.5 Kbytes program memory, 128 bytes RAM and EEPROM of 64 bytes. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 22 I/O Pins – PIC16F873/876 33 I/O Pins – PIC16F874/877 Power-On Reset (POR) Brown-Out Reset (BOR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD). Peripherals. 10-bit Analogue-to-Digital Converter (ADC) - PIC16F873/876 5 Channels, PIC16F874/877 8 Channels Two Capture, Compare, PWM (CCP) Modules Two 8-bit Timers One 16-bit Timer Synchronous Serial Port (SSP) with SPI and I2C Universal Synchronous Asynchronous Receiver Transmitter (USART) Parallel Slave Port (PSP) – PIC16F874/877 Models Only

Microchip

Microchip PIC16F72-I/SP, 8bit PIC Microcontroller, 20MHz, 2K Flash, 28-Pin SPDIP　PIC16F72-I/SP

PIC16F72 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F72 family of microcontrollers is based upon Microchip s Mid-range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, 3.5 Kbytes program memory and 128 bytes RAM. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 22 I/O Pins Power-On Reset (POR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-Out Reset (BOR) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP). Peripherals. 5 Channel 8-bit Analogue to Digital Converter (ADC) Capture, Compare, PWM (CCP) Module Two 8-bit Timers One 16-bit Timer Synchronous Serial Port (SSP) with SPI and I2C

Microchip

Microchip PIC16F74-I/P, 8bit PIC Microcontroller, 20MHz, 4K Flash, 40-Pin PDIP　PIC16F74-I/P

PIC16F73/74/76/77 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F73/74/76/77 family of microcontrollers is based upon Microchip s Mid-range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 14 Kbytes program memory and up to 368 bytes RAM. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 22 I/O Pins – PIC16F73/76 Models 33 I/O Pins – PIC16F74/77 Models Power-On Reset (POR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-Out Reset (BOR) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD). Peripherals. 8-bit Analogue to Digital Converter (ADC) – PIC16F73/76 5 Channels, PIC16F74/77 8 Channels Two Capture, Compare, PWM (CCP) Modules Two 8-bit Timers One 16-bit Timer Synchronous Serial Port (SSP) with SPI and I2C Universal Synchronous Asynchronous Receiver Transmitter (USART)

Microchip

Microchip PIC16F819-I/P, 8bit PIC Microcontroller, 20MHz, 3.584 kB, 256 B Flash, 18-Pin PDIP　PIC16F819-I/P

PIC16F818/819 8-Bit Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F818/819 family of microcontrollers is based upon Microchip s Mid-Range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 14 Kbytes program memory and 368 bytes RAM. On board is a configurable oscillator factory calibrated to ±1% accuracy. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 8 MHz Internal Oscillator – Selectable Frequencies 8 MHz to 31 kHz 16 I/O Pins Power-On Reset (POR) Brown-Out Reset (BOR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD). Peripherals. 5 Channel 10-bit Analogue-to-Digital Converter (ADC) Capture, Compare, PWM (CCP) Module Two 8-bit Timers One 16-bit Timer Synchronous Serial Port (SSP) with SPI and I2C

Microchip

Microchip PIC16F873-20/SP, 8bit PIC Microcontroller, 20MHz, 256 x 8 words, 8K x 14 words Flash, 28-Pin SPDIP　PIC16F873-20/SP

PIC16F873/874/876/877 8-Bit Flash Microcontrollers. The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F873/874/876/877 family of microcontrollers is based upon Microchip s Mid-Range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, 3.5 Kbytes program memory, 128 bytes RAM and EEPROM of 64 bytes. Microcontroller Features. 20 MHz Max. CPU Speed 35 Instructions 8 Level Hardware Stack 22 I/O Pins – PIC16F873/876 33 I/O Pins – PIC16F874/877 Power-On Reset (POR) Brown-Out Reset (BOR) Power-Up Timer (PWRT) Oscillator Start-Up Timer (OST) Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD). Peripherals. 10-bit Analogue-to-Digital Converter (ADC) - PIC16F873/876 5 Channels, PIC16F874/877 8 Channels Two Capture, Compare, PWM (CCP) Modules Two 8-bit Timers One 16-bit Timer Synchronous Serial Port (SSP) with SPI and I2C Universal Synchronous Asynchronous Receiver Transmitter (USART) Parallel Slave Port (PSP) – PIC16F874/877 Models Only