Semiconductor Development Kits
Filters
- by Product group
- by Product
Sort by:
-
Microchip Curiosity MCU Development Board DM320103 DM320103
PIC32MX470F512H Curiosity Board. The Curiosity PIC32MX470 Development Board is ideal for developing audio, USB and Bluetooth applications based on a 32-bit PIC32MX microcontroller. 120MHz PIC32MX470F512H 32-bit microcontroller with 512KB Flash memory, 128KB RAM PICkit On-Board (PKOB) programmer/debugger GPIO expansion header USB connector for PKOB USB connector for PIC32 USB connectivity (Device/Host mode) Powered from either USB connector or via header for external +5V supply 3 x User LEDs User RGB LED User pushbutton MCLR reset pushbutton ICSP header for external debugger such as MPLAB REAL ICE or MPLAB ICD 3 2 x MikroBUS sockets for MikroElectronika Click expansion boards X32 header for PIC32 Audio Codec daughter board (RS ; 904-8427 904-8427 ) Footprint for optional BM64 Bluetooth 4.2 Stereo Audio module providing wireless connectivity
1 products found
JPY: 7,630
USD: 47.83
-
Microchip Xplained Mini MCU Evaluation Kit ATTINY817-XMINI ATTINY817-XMINI
ATtiny817 Xplained Mini Evaluation Board. The ATtiny817 Xplained Mini evaluation board is a hardware platform for evaluating ATtiny817, ATtiny816, ATtiny814, ATtiny417 microcontrollers. 20MHz ATtiny817 AVR 8-bit microcontroller with 8KB Flash memory, 512B SRAM, 128B EEPROM On-board Mini Embedded Debugger (mEDBG) with full source-level debugging support in Atmel Studio Auto-ID for board identification in Atmel Studio MCU Operating Temperature Range: -40 to +105°C Access to all signals on target MCU Green status LED User pushbutton 2 x User QTouch capacitive touch pads Virtual COM port for PC connection microUSB debug connector Powered from USB or external connector Arduino Shield-compatible header footprints Target SPI bus header footprint Xplained Pro extension headers can easily be strapped in
1 products found
JPY: 4,250
USD: 26.64
-
STMicroelectronics STM32 Nucleo-144 MCU Development Board NUCLEO-F413ZH NUCLEO-F413ZH
NUCLEO-F413ZH Nucleo-144 Development Board. This STM32 Nucleo-144 board provides an affordable and flexible way for users to build prototypes with the STM32F413ZHT6 microcontroller. The Zio connector, which is an extension of Arduino Uno, provides access to more peripherals and with the ST morpho headers expands the functionality with a choice of Shields. The integrated ST-LINK/V2-1 debugger/programmer comes with the STM32 comprehensive software HAL library, software examples, as well as direct access to the ARM mbed on-line resources. Supported by wide choice of Integrated Development Environments (IDEs) including IAR, Keil, GCC-based and ARM mbed. STM32F413ZHT6 100MHz Cortex-M4F core microcontroller with 1.5MB Flash memory, 320KB SRAM Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory Up to 24 serial communication interfaces: USART, IrDA, I²C, SPI, LIN, CAN, USB, I²S, SDIO True random number generator CRC calculation unit RTC with subsecond accuracy and hardware calendar 96-bit unique ID Full access to all GPIO with ST Zio connector (Arduino Uno v3 connectivity support) ST morpho extension pin headers for access to all GPIO ST-LINK/V2-1 debugger/programmer with SWD connector Flexible board power supply USB OTG or FS Device with micro-AB connector 3 x LEDs: Power LED, USB communication, User LED User and Reset pushbuttons 32.768 KHz crystal oscillator ARM mbed Enabled (mbed.org)
1 products found
JPY: 5,020
USD: 31.47
-
Microchip Technology Xplained Pro MCU Development Board ATSAMD21-XPRO ATSAMD21-XPRO
ATSAMD21 Xplained Pro Development Board. The Atmel ® ATSAMD21 XPRO evaluation kit is intended to prototype and evaluate the ATSAM D21 ARM ® Cortex ® M0+ based microcontrollers. The SAM D21 Xplained Pro microcontroller kit hardware platform is supported by the Atmel Studio integrated development platform ( IDP ). In addition the Xplained Pro MCU series kit includes an on board embedded debugger with no need for any further tools to program or debug the ATSAMD21J18A microcontroller. Features & Benefits of the ATSAMD21 Xplained Pro Development Board ;SAMD21J18A microcontroller ;User and reset button ;USB interface ;8 Mbit Serial Flash ;Xplained Pro extension headers x 3 ;Embedded Debugger(EDBG) ;Status LED ;32 kHz crystal
1 products found
JPY: 11,500
USD: 72.09
-
SEGGER J-Link PLUS Debugging Emulator for use with Flash microcontrollers J-Link PLUS
USB cable, 20-pin ribbon cable. J-Link PLUS Probe. J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash. Supported Processors. ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N. Features. Direct download into Flash memory of most microcontrollers supported Download speed up to 1MB/second Supports unlimited breakpoints in Flash memory Supports breakpoints in external Flash memory of Cortex-M systems Supports concurrent access to CPU by multiple applications Remote Server included. Allows using J-Link remotely via TCP/IP GDB Server included Supports J-Flash Production Flash programming Supports multiple target interfaces: JTAG, SWD Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output) Wide target voltage range: +1.2V to +3.3V, +5V tolerant Supports JTAG chains with multiple devices Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available RDI / RDDI interface DLL available Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG 20-pin PC interface: USB 2.0 Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Supported by all major IDEs Software Developer Kit (SDK) available Free software updates, 1 year of support. Target Adapters ; Adapter Cables. 131-1325 131-1325 J-Link Target Power Supply Adapter. 131-1326 131-1326 J-Link 10-pin Needle Adapter. 131-1327 131-1327 J-Link RX100/200/600 MCU Adapter. 131-1328 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter. 131-1329 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter. 131-1330 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter. 131-1331 131-1331 J-Link Microchip PIC32 MCU Adapter. Link Isolator Boards. 131-1335 131-1335 J-Link ARM JTAG Isolator Board. 131-1336 131-1336 J-Link ARM SWD Isolator Board. 131-1337 131-1337 J-Link USB Isolator Board
1 products found
JPY: 168,000
USD: 1,053.09
-
SEGGER J-Link Target Supply adapter Adapter for use with J-Link Probes J-Link Target Supply adapter
J-Link Target Supply Adapter. The J-Link Target Supply Adapter provides an adjustable power supply to a target board. Compatible Probes. J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM. Features. MCP1826T LDO voltage regulator Input from J-Link probe via 20-pin 0.1in socket Output to Target via 20-pin 0.1in header Default output: +3.3V @ 400mA Output voltage adjustable from +1.0V @ 150mA to +3.6V @ 400mA by changing resistor Power On LED
1 products found
JPY: 19,000
USD: 119.10
-
SEGGER J-Link RX Adapter Adapter for use with J-Link Probes J-Link RX Adapter
J-Link RX Adapter. The J-Link RX Adapter maps from the J-Link 20-pin 0.1in connector to the 14-pin 0.1in Renesas connector and allows JTAG + FINE connections to Renesas RX family microcontroller devices. Supported Processors. Connect via FINE: RX111/RX210/RX21A/RX220 Connect via JTAG: RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T. Features. LF33CDT +3.3V @ 500mA LDO voltage regulator JTAG/FINE select link Input from J-Link probe via 20-pin 0.1in socket Output to Target via RSK 14-pin header
1 products found
JPY: 49,700
USD: 311.54
-
SEGGER 8.06.00 J-Link 19-Pin Cortex M Adapter Adapter for use with J-Link Probes 8.06.00
J-Link 19-Pin Cortex-M Adapter. The J-Link 19-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems. Supported Probes. J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable. Features. Input from J-Link probe via 20-pin 0.1in socket Output to Target via 19-pin 0.05in Samtec FTSH connector TRST can be connected to pin 9 of the Cortex-M adapter if required
1 products found
JPY: 18,400
USD: 115.34
-
SEGGER 8.06.02 J-Link 9-Pin Cortex M Adapter Adapter for use with J-Link Probes 8.06.02
J-Link 9-Pin Cortex-M Adapter. The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems. Supported Probes. J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable. Features. Input from J-Link probe via 20-pin 0.1in socket Output to Target via 9-pin 0.05in Samtec FTSH connector TRST can be connected to pin 9 of the Cortex-M adapter if required
1 products found
JPY: 8,910
USD: 55.85
-
STMicroelectronics STEVAL-MKI174V1, Adapter Board for DIP24 Socket STEVAL-MKI174V1
LIS2DS12 3-Axis Accelerometer Adapter Board for DIP24 Socket, STMicroelectronics. The STEVAL-MKI174V1 is an adapter board designed to evaluate the MEMS digital output motion sensor LIS2DS12, an ultra low-power high performance 3-axis "pico" accelerometer. The board can be plugged into a standard DIP24 socket, providing access to the complete LIS2DS12 pinout. It comes ready-to-use with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109V3 motherboard, where you can use the downloadable graphical user interface (Unico GUI). Ultra-low current consumption, different with output data rates ±2 g / ±4 g / ±8 g / ±16 g full scale 16-bit data output Supply voltage 1.62 V to 1.98 V Independent Input/Output supply (1.8 V) High-speed I²C/SPI digital output interface Embedded temperature sensor 256-level FIFO buffer Motion and acceleration detection including free-fall, wakeup, single and double-tap detection
1 products found
JPY: 4,290
USD: 26.89
-
Digilent 240-021-2 for use with 12-Pin Pmod Board 240-021-2
2 x 6-pin gender changers, right-angle male header, 12-pin gender changer. Pmod Cable Kit, 12-pin. These extension cables let you locate a Pmod 150mm away from its host board, or use a 12-pin Pmod on a system board with only two 6-pin Pmod headers available.
1 products found
JPY: 1,400
USD: 8.78
-
Digilent Pmod MAXSONAR Maxbotix Range Finder Expansion Board 240-071 240-071
Pmod MAXSONAR Range Finder. The Pmod MAXSONAR is a single-transducer ultrasonic range finder based on the MaxBotix® LV-MaxSonar®-EZ1™ module. Effective object detection range: 150 to 6480mm Distance resolution: 25mm over detection range Free-run operation readings every 50ms Host communication: UART, PWM and Analogue Dimensions: 23 x 20mm
1 products found
JPY: 6,900
USD: 43.25
-
Digilent Analog-to-Digital Converter Expansion Module 410-064 410-064
Pmod AD1 Dual 1Msps 12-bit ADC. The Digilent Pmod AD1 is a two-channel, 12-bit ADC module featuring the Analog Devices AD7476A device. Simultaneous A/D conversion at up to 1MSPS per channel Dual 2-pole Sallen-Key anti-alias filters Host communication: SPI bus 6-pin Pmod connector with GPIO interface Dimensions: 24 x 20mm
1 products found
JPY: 6,900
USD: 43.25
-
Digilent Pmod RS232 Expansion Module 410-068 410-068
Pmod RS232 UART-RS232 Converter. The Pmod RS232 converts the digital logic-voltage levels of a UART device to RS-232 voltage levels required by a PC COM port for example. The RS-232 module is configured as a Data Communications Equipment (DCE) device, it connects to Data Terminal Equipment (DTE) devices such as a PC serial COM port, using a straight-through cable. Whats on-board? MAX3232 RS-232 transceiver device Standard DE9 female connector for RS-232 output Jumper links for optional RTS/CTS flow control when available Follows Digilent Pmod Interface Specification Type 3 Dimensions: 25 x 33mm
1 products found
JPY: 3,470
USD: 21.75
-
Digilent Expansion Module 410-113 410-113
Pmod DA2 Dual 12-bit DAC. The Pmod DA 2 is a dual 12-bit Digital-to-Analogue converter module featuring the Texas Instruments DAC121S101 device. 2 x simultaneous conversion channels Settling time: 8μs Power down mode Host communication: serial 6-pin Pmod connector with GPIO interface Dimensions: 25 x 20mm
1 products found
JPY: 4,620
USD: 28.96
-
Digilent Pmod BB Breadboard Expansion Board 410-136 410-136
Solderless breadboard. Pmod BB Wire-Wrap/Breadboard. The Pmod BB is a prototyping board with a 266 point grid of solder pads for custom development. A solderless breadboard is also provided which can be stuck on the board instead. 266 tie-point solder area Optional 170 tie-point solderless breadboard Additional Pmod host port Jumper links to tie port power pins together 2 x 12-pin port signal breakout headers Dimensions: 89 x 38mm
1 products found
JPY: 2,310
USD: 14.48
-
Digilent LED Expansion Module 410-163 410-163
Pmod 8LD 8 x HB LEDs. The Digilent Pmod 8 LD features eight high-brightness LEDs driven by logic level transistors so that each LED can be individually illuminated from a logic high signal. 8 x High-Brightness green LEDs Logic-level inputs (Logic 1 = LED on) 2 ;font face="symbol">´ ;/font> 6-pin Pmod connector with GPIO interface Dimensions: 28 x 20mm
1 products found
JPY: 2,310
USD: 14.48
-
Digilent 410-183 Basys Artix-7 Development Board 410-183
Basys 3 Artix-7 FPGA Trainer Board. The Basys 3 is an entry-level FPGA development board designed for the Vivado Design Suite, featuring Xilinx Artix-7 architecture. Vivado Design Suite WebPACK edition can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition. Xilinx Artix-7 FPGA (XC7A35T-1CPG236C) 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 1800Kbit Fast Block RAM 5 x Clock Management Tiles, each with a phase-locked loop (PLL) 90 x DSP slices Internal clock speeds exceeding 450MHz On-chip Analogue-to-Digital Converter (XADC) On-board 32Mbit Quad-SPI Serial Flash memory Programmable over JTAG, Quad-SPI or USB USB-UART Bridge via microUSB socket USB-A HID Host socket for mice, keyboards and memory sticks 12-bit VGA display output on DE15 connector FPGA Programming-Done LED 16 x User LEDs 4-digit 7-segment LED display 5 x User Pushbuttons 16 x User Slide-Switches 3 x Standard Pmod 2 x 6-pin connectors Dual purpose XADC signal / Standard Pmod 2 x 6-pin connector Powered from either USB socket or external +5V header
1 products found
JPY: 43,600
USD: 273.30
-
Digilent 410-249 Programmer Adapter for use with Xilinx FPGAs 410-249
Xilinx JTAG 2 x 7-pin 2mm connector adapter, USB cable. This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in. JTAG-HS2 FPGA Programming Cable. The JTAG - HS 2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC. Features. Compatible with all Xilinx tools Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG) On-board ADP123AUJZ 300mA voltage regulator Separate Vref drives JTAG/SPI signal voltages Vref can be any voltage between +1.8V and +5V USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec JTAG/SPI frequency settable by user PC connector: MicroUSB JTAG connector: 0.1in 6-pin SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec Fully supported by Digilent's Adept software and Adept SDK. Supported Target Devices. Xilinx FPGAs Xilinx Zynq-7000 Xilinx CoolRunner™/CoolRunner-II CPLDs Xilinx Platform Flash ISP configuration PROMs Selected third-party SPI PROMs Selected third-party BPI PROMs. Target Devices Not Supported. Xilinx 9500/9500XL CPLDs Xilinx 1700 and 18V00 ISP configuration PROMs Xilinx FPGA eFUSE programming
1 products found
JPY: 13,400
USD: 84.00
-
Digilent Accelerometer Expansion Module 410-255 410-255
Pmod ACL2 3-axis Accelerometer. The Pmod ACL 2 is a 3-axis MEMS accelerometer module featuring the Analog Devices ADXL362 device. Measurement ranges: ±2g, ±4g, ±8g Up to 12-bit resolution on each axis User-selectable resolution Free-fall detection 512-sample FIFO buffer Host communication: SPI bus Follows Digilent Pmod Interface Specification Type 2A Activity/inactivity monitoring Power-saving modes Dimensions: 25 x 20mm
1 products found
JPY: 3,920
USD: 24.57
-
Digilent 410-292 Nexys 4 DDR Artix-7 Development Board 410-292
Hardshell plastic case with protective foam, USB cable. Nexys 4 DDR Artix-7 FPGA Trainer Board. The Nexys 4 is an FPGA development board designed for the educational market, featuring Xilinx Artix-7 architecture. The Nexys 4 DDR is compatible with the high-performance Vivado Design Suite as well as the ISE® toolset, which includes ChipScope™ and EDK. WebPACK editions of these toolsets can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition. Xilinx Artix-7 FPGA (XC7A100T-1CSG324C) Features. 101440 logic cells in 15850 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops). 4860Kbit Fast Block RAM. 6 x Clock Management Tiles, each with a phase-locked loop (PLL). 240 x DSP slices. Internal clock speeds exceeding 450MHz. On-chip Analogue-to-Digital Converter (XADC). Nexys 4 DDR Board Features. MT47H64M16HR-25 128MiB DDR2 SDRAM S25FL128S 16MiB Quad-SPI Serial Flash memory ADXL362 SPI bus 3-axis accelerometer ADT7420 I²C bus temperature sensor ADMP421 MEMS microphone with PDM output Programmable over JTAG, Quad-SPI or USB FPGA Programming-Done LED 2 x 4-digit 7-segment LED displays 16 x User LEDs 2 x User RGB LEDs 5 x User Pushbuttons 16 x User Slide-Switches USB-UART Bridge via microUSB socket USB-A HID Host socket for mice, keyboards and memory sticks 12-bit VGA display output on DE15 connector RJ45 socket for 10/100 Ethernet connection 3.5mm jack socket for mono audio output microSD card slot 4 x Standard Pmod™ 2 x 6-pin connectors Analogue XADC Pmod™ 2 x 6-pin connector Powered from either USB, barrel jack socket or external battery pack
1 products found
JPY: 91,700
USD: 574.81
-
Digilent RS-485 Expansion Module 410-310 410-310
Pmod RS485 UART-RS485 Converter. The Pmod RS485 uses the Analog Devices ADM2582E chip to provide RS-485 / RS-422 differential signalling between devices in environments with high electrical noise. High-speed RS-485 differential signalling module Isolated RS-485/RS-422 interfaces for use in noisy environments 16Mbps maximum data rate Connect up to 256 nodes on one bus Differential half- or full-duplex communication Thermal shutdown and ±15kV ESD protection Host communication: serial UART Dimensions: 37 x 20mm
1 products found
JPY: 9,200
USD: 57.67
-
Digilent Pmod OLEDrgb Expansion Module 410-323 410-323
Pmod OLEDrgb OLED display. Digilent ‘s Pmod OLEDrgb (Revision B) is an organic RGB LED module with a 96 x 64 pixel display capable of 16-bit colour resolution. Designed to work in conjunction with a host board, communicating via the SPI protocol, the Pmod OLEDrgb is a graphical display that allows users the option to light up any individual pixel on the OLED screen. Utilising a Solomon Systech SSD1331 display controller, the PmodOLEDrgb receives information from the host board to be displayed on the OLED screen. Ideal for displaying a range of information including graphs and text as well as full colour pictures. What ‘s on-board? 20 x 13mm RGB OLED display 96 x 64 pixels 16-bit colour resolution 12-pin Pmod connector w/SPI interface Serial SPI host communication 2x low-power display shutdown modes 35 x 25mm overall size
1 products found
JPY: 4,610
USD: 28.90
-
Digilent 410-328-35 Cmod A7 Artix-7 Module 410-328-35
Cmod A7 Artix-7 FPGA DIP Module. The Digilent Cmod A7 is a small 48-pin DIP form factor development board built around a Xilinx Artix-7 FPGA. Ideal for use with solderless breadboards. Xilinx Artix-7 FPGA (XC7A35T-1CPG236C) 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 1800Kbit Fast Block RAM 5 x Clock Management Tiles, each with a phase-locked loop (PLL) 90 x DSP slices Internal clock speeds exceeding 450MHz On-board IS61WV5128BLL-10BLI 512KB SRAM On-board N25Q032A 4MB Quad-SPI Flash memory MicroUSB connector USB-JTAG Programming Circuit On-board FT2232HQ USB-UART Bridge 2 x User LEDs User RGB LED 2 x User Pushbuttons 48-pin DIP connector with 44 x GPIO and 2 x Analogue inputs Standard Pmod 2 x 6-pin connector Power supply: USB or external +3.3V to +5.5Vdc connected to DIP pins
1 products found
JPY: 26,200
USD: 164.23
-
Silicon Labs USB to UART Evaluation Kit for CP2102N - CP2102N-miniEK CP2102N-miniEK
CP2102N-miniEK USB to UART Bridge Evaluation Kit, Silicon Labs. The CP2102N-miniEK kit enables you to evaluate the functions of the CP2102N USB to UART Bridge device. The CP2102N device provides a basic microcontroller with a USB serial port using a minimum of components. UART serial I/O with RTS/CTS flow control USB mini-B connector USB connection LED Powered from USB connector VCP drivers for: Windows XP, 7, 8.1, 10, Mac OSX, Linux, Android 20-pin DIL module format for solderless breadboards
1 products found
JPY: 2,950
USD: 18.49
-
MikroElektronika MIKROE-1903, Ambient 2 Click Light Sensor mikroBus Click Board for OPT3001 MIKROE-1903
Click board comes with the header strips soldered. Ambient 2 click mikroBUS™. A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The Ambient 2 click module is equipped with a TI OPT3001 ambient light sensor that measures visible light from any type of source and incorporates an infrared filter. The measurement range of the module is from 0.01 lux to 83000 lux, with 23-bit output resolution. Communication with the target MCU is via the mikroBUS I2C interface, and the board requires a 3.3V power supply.
1 products found
JPY: 3,940
USD: 24.70
-
MikroElektronika, USB 12C click USB to I2C, USB to UART Development Board for MCP2221 for MikroBUS - MIKROE-1985 MIKROE-1985
Click board comes with the header strips soldered. USB I2C click mikroBUS™. USB I2C click is a mikroBUS add-on board for enabling USB connectivity where you have UART (Universal Asynchronous Receiver and Transmitter) or I²C bus interface. It features the Microchip MCP2221, USB 2.0 to I²C and/or UART Protocol Converter with GPIO. Full-speed USB 2.0 at max. 12 Mbps I²C bus up to 400 kHz clock rates UART 300 and 115200 Baud rates General Purpose Input/Outputs (GPIO) on the edges of the board I²C bus signal and power pins are also on the other edges of the board 3.3 V (default) or 5 V power supply on mikroBUS socket Dimensions 42.9 x 25.4 mm
1 products found
JPY: 3,940
USD: 24.70
-
MikroElektronika MIKROE-2101, SHT Click Temperature & Humidity Sensor mikroBus Click Board for SHT3x-DIS MIKROE-2101
Click board comes with the header strips soldered. SHT click mikroBUS™. SHT click is a mikroBUS™ add-on board for Temperature and Humidity sensing with digital output. It features the Sensiron SHT3x-DIS, a Humidity and Temperature Sensor. The SHT3x-DIS has increased intelligence, reliability, long-term stability and high accuracy. Alerts are programmable for certain temperature or humidity value settings with connection to the interrupt pin. Reset (RST) pin is used to generate a reset of the sensor. The interrupts allow the sensor to function as a thermostat. Fully calibrated, linearized, and temperature compensated ±2% RH typical Humidity Accuracy ±0.3°C typical Temperature Accuracy 16-Bit Humidity and Temperature Output Data I²C bus interface on mikroBUS socket I²C bus binary address hardware jumper 3.3 V (default) or 5 V power supply on mikroBUS socket Dimensions 28.6 x 25.4 mm
1 products found
JPY: 7,140
USD: 44.76
-
MikroElektronika MIKROE-2458, ECG Click Bundle Heart Rate Sensor mikroBus Click Board MIKROE-2458
The ECG Click Board is available as a separate item, MikroElektronika part MIKROE-2455. The target board requires an MCU with a minimum 10-bit ADC. Click board comes with the header strips soldered. ECG click mikroBUS™ Bundle. The MikroElektronika ECG Click Board is an accessory board that provides a simple method of adding electrocardiogram measurement hardware to a development platform. This starter kit variant provides the required electrodes and cables in addition to the ECG Click Board. Like all Click Boards the ECG Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration. The ECG Click measures electrical activity of the heart through 3 electrodes taped to the skin that connect to the board via a 3.5mm jack. The circuity of the ECG click amplifies the electrical signals from the heart and filters out noise, providing a clean and clear signal for the mother development board. The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot. Features. Fits the popular mikroBUS™ socket 7-block design (protection, preamplifier, high-pass filter #1, amplifier, high-pass filter #2, low-pass filter, DRL circuit) Jumpers for setting output voltage range Trimmer potentiometer to adjust gain MCP609 Op Amp MAX6106 Voltage Reference IC ESD, Overvoltage and Overcurrent protection Analogue output (mikroBUS™ AN pin) 5 V power supply. Package Contents. 1 x ECG Click Board 1 x 3 Lead ECG Cable with 3.5mm Jack 30 x Single Use ECG Electrodes
1 products found
JPY: 16,100
USD: 100.92
-
MikroElektronika MIKROE-2539, Grid-EYE Click Infrared (IR) Sensor mikroBus Click Board for AMG8853 MIKROE-2539
Click board comes with the header strips soldered. Grid-EYE click mikroBUS™. The Click accessory modules plug into the mikroBUS sockets in MikroElektronika microcontroller development boards. Grid-EYE click is an 8 x 8 thermal array sensor-detector featuring the Panasonic AMG8853 array sensor. This board detects long-wavelength infrared radiation - heat rather than light. AMG8853 thermal-infrared array sensor. Temperature measuring range: -20 to +100°C. Detecting distance: 5m. Viewing angle: 60°. Frame rate: 1 or 10fps. Communication: serial I²C bus. Power supply: +3.3 or +5Vdc. LED power indicator
1 products found
JPY: 27,800
USD: 174.26
-
Renesas Electronics MCU Evaluation Board YQB-R5F1057A-TB YQB-R5F1057A-TB
Target Board for RL78/G11 Microcontrollers. The Renesas YQB-R5F1057A-TB Target board is designed for evaluating application operation with RL78/G11 group microcontrollers. 24MHz RL78/G11 (R5F1057AANA) 16-bit MCU with 16KB Flash memory, 1.5KB RAM Power status LED 2 x User LEDs User pushbutton 24-pin peripheral connector socket pads 14-pin header for E1/E2 Lite emulator pod connection 4 x 24 pad prototyping area Power supply: +1.6 to +5.5Vdc Dimensions: 71 x 56mm
1 products found
JPY: 8,760
USD: 54.91
-
Digilent Digital Discovery USB Logic Analyser Portable Logic Analyzer & Digital Pattern Generator 410-338 410-338
Digital Discovery Logic Analyser 2 x 6-flywire assembly, 2 x 16-flywire assembly, USB-A to micro-B cable. For sampling rates over 200Msps, a High Speed Adapter (Digilent Part No. ; 410-349 410-349 ) must be used. Digital Discovery Logic Analyser. Digilent ‘s Digital Discovery™ unit is both a logic analyser and a pattern generating instrument specially designed to help optimize channels as well as both speed and portability. Allowing you to debug and visualize as well as simulate digital signals for most embedded projects. The Digital Discovery is driven by the free WaveForms software. The programmable power supply supplies the Logic Analyser input buffers as well as the Pattern Generator input/output buffers to keep logic-level consistency with the circuit under test. The small and portable unit has been designed for use in a wide range of applications and environments to withstand a variety of conditions. What ‘s on board? Digital Logic Analyser: 8 channels @ 800Msps, 16 channels @ 400Msps or 32 channels @ 200Msps 16-channel 100Msps Pattern Generator 16-channel Virtual Digital I/O including buttons, switches and LEDs Digital Bus Analyser: SPI, I²C, UART and Parallel Programmable Power Supply: +1.2 to +3.3Vdc @ 100mA 2 x I/O digital trigger signals for linking multiple instruments USB communication with host PC via micro-AB connector
1 products found
JPY: 60,000
USD: 376.11
-
Digilent 410-346-20 Arty Z7-20 APSoC Zynq-7000 Development Board 410-346-20
Arty Z7 Zynq-7000 Development Board. The Arty Z7-20 is a development platform designed around the Xilinx Zynq-7000™ All Programmable System-on-Chip (AP SoC). The Zynq-7000 architecture integrates a dual-core, 650MHz ARM Cortex-A9 processor with Artix-7 series FPGA logic. This pairing surrounds a powerful processor with a unique set of software defined peripherals and controllers. The Vivado, Petalinux, and SDSoC toolsets each provide a path between defining your custom peripheral set and bringing its functionality up to a Linux OS or 'bare-metal' program running on the processor. Xilinx Zynq-7000 (XC7Z020-1CLG400C). Processor: 650MHz dual ARM Cortex-A9 core Look-up Tables (LUTs): 53200 Flip-flops: 106400 Block RAM: 630KB Clock Management Tiles: 4 Available Shield I/O: 49 DDR3 memory controller with 8 x DMA channels and 4 x AXI3 Slave ports High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO Low-bandwidth peripheral controller: SPI, UART, CAN, I²C Programmable from JTAG, Quad-SPI Flash or microSD card Programmable logic equivalent to Artix-7 FPGA Memory. Board Memory and Power. On-board IS43TR16256A-125KBL 512MB DDR3 SDRAM with 16-bit bus @ 1050Mbps On-board S25FL128S 16MB Quad-SPI Flash with 48-bit unique EUI-48/64™ compatible identifier microSD card slot Powered from USB or +7V to +15Vdc via barrel jack. System Connectivity. 10/100/1000 Ethernet via RJ45 connector USB-UART Bridge via micro-B socket USB-JTAG Programming via micro-B socket USB OTG PHY (supports Host only) via USB-A socket. Audio and Video. HDMI sink port (input) HDMI source port (output) PWM driven mono audio output via 3.5mm jack socket. Switches and LEDs. Reset and Program pushbuttons 4 x User pushbuttons 2 x User slide-switches 4 x User LEDs 2 x User RGB LEDs. Expansion Connectors. chipKIT/Arduino R3 Shield headers 2 x Standard 12-pin Pmod™ connectors
1 products found
JPY: 78,700
USD: 493.32
-
Digilent Temperature & Humidity Sensor Expansion Module 410-347 410-347
Library and example code available at: reference.digilentinc.com/reference/pmod/pmodhygro/. Pmod HYGRO Humidity/Temperature Sensor. The Pmod HYGRO module is a relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. Relative Humidity Accuracy: ±2% Temperature Sensor Accuracy: ±0.2°C Good stability at high humidity 14-bit measurement resolution Internal resistive heating element 6-pin Pmod connector with serial I²C bus interface Pass-through Pmod host port for I²C bus daisy-chaining
1 products found
JPY: 3,950
USD: 24.76
-
Core Ltd GR-PEACH (Normal) MCU Development Board YGRPEACHNORMAL YGRPEACHNORMAL
GR-PEACH RZ/A1H Development Boards. The GR-PEACH is a development board with an Arduino™ Uno format for the Renesas RZ/A1 group of 32-bit ARM Cortex-A microprocessors. GR-PEACH is ARM mbed-enabled™ which provides on-line development tools 'in the Cloud' via the mbed website. The GR-PEACH Normal part is part-populated with interface connectors. The GR-PEACH Full part is fully populated with a range of connectors. Renesas RZ/A1H Features. 400MHz R7S721001VLBG Cortex-A9 MPU with 10MB RAM, FPU and NEON. 32KB Instruction cache, 32KB Data cache and 128KB L2 cache. OpenVG1.1 2D graphics accelerator. Video display controller. Distortion correction engine for display. JPEG Codec unit. CMOS Camera interface. Serial sound interfaces, sound generator and CD-ROM decoder. Power modes: Sleep, Software Standby, Deep Standby, Module Standby. GR-PEACH Board Features. On-board MX25L6435EM2I-10G 8MB QSPI Flash memory. Micro-B USB Host/Function connector. Micro-B USB mbed debug/program connector. MicroSD card slot. RJ45 socket for 10/100 Ethernet connection ( FULL only). Hirose connector for Rohm BP3595 WiFi module ( NORMAL only). Pads for 10-pin ARM CoreSight 10 JTAG connector. Pads for XBee wireless module headers. Pads for Auxiliary Power connector. Arduino UNO R3 Shield compatible headers ( FULL only). GR-PEACH expansion headers ( FULL only). Reset and User pushbuttons. Power and User LEDs. User RGB LED. Power supply: +5Vdc via USB sockets, +5.5 to +16Vdc via Arduino/Aux Power connector. Dimensions: 53.34 x 67.58mm. RS Product Codes. 136-9536 136-9536 GR-PEACH NORMAL Part-populated with connectors. 136-9537 136-9537 GR-PEACH FULL Fully-populated with connectors
1 products found
JPY: 10,500
USD: 65.82
-
MikroElektronika MIKROE-2510, Heart-Rate 4 Click Heart Rate Sensor mikroBus Click Board for MAX30101 for Wearable MIKROE-2510
Heart Rate 4 click mikroBUS™. A Click accessory module for use with MikroElektronika mikroBUS microcontroller development boards. The Heart Rate 4 click utilises the Maxim MAX30101 high-sensitivity pulse oximeter and heart-rate sensor which includes internal LEDs, photodetectors, optical elements and low-noise electronics. The Click board communicates with the target MCU over I2C interface and requires a 3.3 or 5V power supply.
1 products found
JPY: 7,370
USD: 46.20
-
MikroElektronika MIKROE-2554, Fever Click Temperature Sensor mikroBus Click Board for MAX30205 for Wearable Devices MIKROE-2554
Fever Click mikroBUS™. A Click accessory module for use with MikroElektronika mikroBUS microcontroller development boards. The Fever click board uses a Maxim MAX30205 human body temperature sensor and has a temperature measurement accuracy of ±0.1°C from 37 to 39°C. The click is designed to operate from a 3.3V power supply and communicates with the target MCU via I2C interface. Body temperature measurement accuracy of 0.1°C 1/256 °C temperature measurement resolution Operating temperature range 0 to 50°C
1 products found
JPY: 3,020
USD: 18.93
-
MikroElektronika MIKROE-2561, Earthquake Click Vibration Sensor mikroBus Click Board for D7S MIKROE-2561
Earthquake click mikroBUS™. A Click accessory module for use with MikroElektronika mikroBUS microcontroller development boards. The Earthquake click utilises the DS7 high-precision seismic sensor from Omron to provide a spectral intensity (SI) acceleration value. The SI value has a high correlation with the seismic intensity scale that defines the magnitude of an earthquake. The click board communicates with the target MCU via I2C interface and requires a 3.3V or 5V power supply. Click board with Omron DS7 high-precision seismic sensor Acceleration detection range ±2,000 gal Shutoff output for seismic intensity level 5 or higher
1 products found
JPY: 19,300
USD: 120.98
-
STMicroelectronics 53L0-SATEL-I1, Gesture Sensor Satellite Board for VL53L0X 53L0-SATEL-I1
Two satellite boards are included in the kit. The VL53L0X is a Class 1 Laser product. 53L0-SATEL-I1 Range ; Gesture Sensor Satellite Boards. The 53L0-SATEL-I1 satellite board is based on the VL53L0X ranging and gesture detection module using FlightSense™ technology. This technology allows absolute distance to be measured independent of target reflectance. The VL53L0X precisely measures the time the light takes to travel to the nearest object and reflect back to the sensor (Time-of-Flight). VL53L0X 3-in-1 ranging and gesture detection sensor module. True distance measurement independent of target size and reflectance. +2.8V regulator and signal level-shifters on break-off board. Supports multi-module applications. Provides basic gesture recognition. Host communication: serial I²C bus
1 products found
JPY: 4,940
USD: 30.97
-
STMicroelectronics STM32 Nucleo-32 MCU Development Board NUCLEO-L432KC NUCLEO-L432KC
NUCLEO-L432KC Nucleo-32 Development Board. The NUCLEO-L432KC is a Nucleo-32 development board featuring the ultra-low power STM32L432KCU6 microcontroller. It enables you to prototype and develop ideas using the STM32 MCU, choosing from different combinations of performance, power consumption and features. The board comes with the STM32 comprehensive software HAL library with various packaged software examples. You will also have direct access to the ARM mbed™ on-line resources. What ‘s on-board? STM32L432KCU6 80MHz Cortex-M4F core microcontroller 256KB Flash memory 64KB SRAM Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory Ultra-low-power microcontroller with FlexPowerControl True random number generator CRC calculation unit 96-bit unique ID Real-Time Clock and Calendar Up to 3 capacitive sensing channels Serial communications: USART, SPI, I²C, USB, SAI, CAN, SWPMI, IRTIM Quad SPI memory interface ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability 3 x LEDs: Power LED, USB communication, User LED Reset pushbutton Arduino Nano connectivity support Flexible board power supply: USB or External ARM mbed Enabled (mbed.org)
1 products found
JPY: 2,730
USD: 17.11
